Montageanleitung 
Hot 
The high-quality 38 mm original cylinder is now also available exclusively with «Vertex» pistons.
This cylinder fits various Puch mopeds / mopeds such as Maxi S / N, Puch X30 NS / NL, Puch X30 NG-2A.
Vertex pistons are world-renowned for their quality and design.
With this cylinder, you will reach your destination quickly and powerfully.
- The intake window has been moved slightly downwards to achieve better timing
- Lubrication holes on the piston to the piston pin.
- The inner flats on the piston were milled flat for clean guidance of the connecting rod bearing
- The piston skirt has been optimized
- The inlet angles of the transfer ports have been adjusted
- Intake and exhaust largely milled flat (exhaust and intake manifold can be fitted without any problems)
With these optimizations, the 38 mm cylinder kit delivers a full 1.6 hp to the rear tire with the correct setting. This makes it the most powerful 38 mm cylinder with seal for Puch ever!
Of course, the original «CH12» is also cast in.
Note: Please note the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
Attention: This cylinder is a reproduction product which is not approved for use on public roads.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | sandblasted |
| Camouflaged | Yes |
| Displacement | 50 ccm |
| Nominal diameter | 38 mm |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 48 mm |
| Ø outlet inside | 20 mm |
| Ø Inlet inside | 9 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 4 pcs |
| Area of application | Standard |
| Hole pattern [mm] | 44 x 44 |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | Yes |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Width: 125 mm · Area of application: Standard · Candle thread: short · Number of fixing points: 4 pcs · Height: 55 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.40
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 106 mm · Thread length: 12 mm · Thread length: 20 mm · Nominal diameter (thread): 6 mm · Puch OEM number: 360.1.10.034.1
EUR 2.15
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Thickness: 0.39 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 1.7 mm · Ø cylinder: 38 mm · Area of application: Standard · Ø outlet inside: 20 mm · Number of components: 4 pcs · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 8.85
swiing® revival piston 38 mm Vertex | Puch
Manufacturer: Vertex · Manufacturer: swiing® revival parts · Ø outside piston (A): 37.96 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Ø piston pin (B): 12 mm · Tolerance group: A · Weight piston kit: 71 g
EUR 71.70
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
EUR 14.20
Explore categories from Cylinder
Moped fans also bought
Nos
Hot
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Color: silver · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 11.90
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Width: 125 mm · Area of application: Standard · Candle thread: short · Number of fixing points: 4 pcs · Height: 55 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.40
Hot
swiing® revival 12 mm carburetor "original" | Puch
Material: Aluminum · Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Nominal diameter: 12 mm · Color: gray · Carburetor type: SRE · Total length: 65 mm · Width: 50 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Height: 108 mm · Area of application: Standard · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 83.60
swiing® revival 12 mm intake manifold | Puch E50
Material: Aluminum · Manufacturer: swiing® revival parts · Camouflaged: No · Mounting type: Screws · Ø inside: 12 mm · Area of application: Original · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Ø External connection: 20 mm · Total length: 45.5 mm
EUR 41.80
swiing® revival 12 mm carburetor set "original" | Puch E50
Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Nominal diameter: 12 mm · Carburetor type: SRE · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Area of application: Standard · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m
EUR 113.50
GPO 38 mm "Racing" High-Compression Cylinder Head | Puch Maxi S, N / X30 NS, NL, N-2AH
Width: 125 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Ø cylinder: 38 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Height: 55 mm · Candle thread: short · Ø screw holder: 7.4 mm · Hole pattern [mm]: 45 x 45 · Decompressor: No
EUR 59.70
Working late? Evening hours on Thursday until 20:00
