Black anodized aluminium gearbox cover, suitable for your Puch moped / moped with E50 engine.
The gearbox cover is equipped with cooling fins to ensure optimum heat dissipation. The increased position of the oil filler hole makes it possible to fill 1.5 dl more oil, which further improves the cooling capacity.
The lid and the filler screw are included in the scope of delivery.
Note: The clutch cover fits both the standard clutch and the Tripple Clutch Racing clutch.
Other matching parts such as the complete Tripple-Clutch racing clutch can be found in the accessories section.
| Manufacturer | Made in Switzerland |
| Material | Aluminum |
| Color | black |
| Surface | anodized |
| Ø inside | 107 mm, 30 mm |
| Ø outside | 116 mm |
| Total length | 116 mm |
| Width | 116 mm |
| Height | 38.5 mm |
| Number of fixing points | 4 pcs |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.35 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.85
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø nipple: 8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Cable length: 1600 mm · Nipple length: 12 mm · Area of application: Standard
EUR 2.85
Oil seal NBR 17/40/7 A DUO | Puch E50
Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Manufacturer: Puch · Material: NBR · Surface: rubberized · Ø inside: 17 mm · Ø outside: 40 mm · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C · Area of application: Standard
EUR 6.10
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Chain pitch: 1/2" x 3/16" · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Color: gray · Chain lock type: Spring lock · Rolling circumference: 1448 mm · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 22.60
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.35 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.85
swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50
Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Manufacturer: swiing® ingenious parts · Weight: 970 g · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 44 mm · Ø piston pin (B): 12 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Ø Bearing seat (ignition side): 17 mm · Area of application: High End · Thread length: 11 mm · Thread length: 15 mm · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
EUR 275.00
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Ignition system: MVT Allumage · Ø outside: 130 mm · Total length: 170 mm · Color: Chrome · Color: black-matt · Width: 150 mm · Height: 82 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
EUR 179.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
