Hot 
First-class racing kit with 50 cc displacement, suitable for your Puch Maxi S / N, X30 Sport NS / NL, X30 Sport NG-2A or Supermaxi moped, moped.
The 38 mm tuning cylinder has a large intake and exhaust as well as optimized timing. In combination with a 15 mm carburettor, this allows significantly more power to be achieved than with the original cylinder.
Compared to other products on the market, the sealing surface in the exhaust area has been enlarged and refreshed. This also makes it possible to fit a 28 mm exhaust manifold, which significantly increases performance even further.
Otherwise, the racing cylinder is virtually indistinguishable from the original. The cast-in «CH12» and the original-style cooling fins ensure an unobtrusive appearance and provide reliable protection from prying eyes, especially from the race organizers.
In addition to the cylinder, the scope of delivery also includes the complete piston kit, all gaskets, the stud bolts and detailed assembly instructions. If you would like to have the complete set, select this in the selection field to also receive the matching cylinder head.
Note:
This racing kit should be run with at least a 22 mm exhaust (2-bend) or 22 mm manifold so that the exhaust gases can also be removed and no heat build-up occurs. Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
Hole pattern [mm]: 44 x 44 · Inlet window: 23.4 x 14.7 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 38 mm |
| Ø cylinder neck | 48 mm |
| Hole spacing inlet | 38 mm |
| Inlet window | 23 / 20 x 14 mm |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Hole spacing outlet | 42 mm |
| Hole pattern [mm] | 44 x 44 |
| Outlet type | straight |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | Yes |
| Camouflaged | Yes |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Alternative version of the Puch OEM number | 349.7.10.105.0 |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Hot
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø outside: 59 mm · Total length: 910 mm · Color: Chrome · Ø Silencer: 54.5 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
EUR 161.40
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Width: 50 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Height: 95 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 95.60
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Ø inside: 15 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total height: 53 mm · Height flange center hole: 43 mm · Hole spacing inlet: 38 mm · Total length: 46 mm · Camouflaged: Yes · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.80
Hot
swiing® ingenious 38 mm cylinder kit (CH12 Vertex-Edition) Tuning camouflaged | Puch
Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Nominal diameter: 38 mm · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Inlet window: 24 / 21 x 15 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 38 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 167.40
GPO 15 mm intake manifold | Puch ZA50
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Mounting type: Screws · Total length: 51.5 mm · Ø External connection: 20 mm · Ø inside: 15 mm · Hole spacing inlet: 32 - 38 mm · Total height: 63 mm · Height flange center hole: 52.5 mm · Number of fixing points: 2 pcs · Camouflaged: No
EUR 47.30
swiing® ingenious 44 mm cylinder kit CH12 camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 21 x 14 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
EUR 143.50
swiing® ingenious 45 mm cylinder kit CH12 camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 23 / 21 x 14 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 143.50
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 730 mm · Ø Internal connection: 28 mm · Exhaust type: Cigar · Ø outside: 70 mm · Flame tube attachment: Flange · Mounting type: Screwed clamp
EUR 143.50
swiing® ingenious 4 mm intake gasket 15 mm intake manifold square | Puch E50, Z50, ZA50
Place of use: Admission · Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (colloquially known as Bakelite) · Ø inside: 15 mm · Thickness: 4 mm · Nominal diameter: 15 mm · Ø screw holder: 6.2 mm · Hole spacing inlet: 38 mm
EUR 9.00
Explore categories from Cylinder
Moped fans also bought
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Standard · Width: 125 mm · Total length: 135 mm · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Height: 55 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.40
swiing® revival stud bolt set M6 x 106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Drive: External hexagon · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.85
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Width: 50 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Height: 95 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 95.60
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Ø inside: 15 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total height: 53 mm · Height flange center hole: 43 mm · Hole spacing inlet: 38 mm · Total length: 46 mm · Camouflaged: Yes · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.80
swiing® ingenious 15 mm carburetor set camouflaged | Puch E50
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Choke control: Hand choke · Camouflaged: Yes · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 125.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
