Additional weight made of stainless steel suitable for HPI Zündungen from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds / mopeds with blower.
The weight is mounted underneath the blower wheel. The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lightened flywheel.
You can find the corresponding flywheel and other attachments in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
| Material | Chrome steel (known as Nirosta®) |
| Thickness | 5 mm |
| Manufacturer | swiing® ingenious parts |
| Number of fixing points | 4 pcs |
| Surface | blank |
| Ø inside | 71.8 mm |
| Ø outside | 117 mm |
| Ø mounting hole | 5 mm |
| Ø bolt circle | 101 mm |
| Weight | 250 g |
| Area of application | Performance, Racing, High End, Tuning |
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Mounting type: Screws · Number of fixing points: 6 pcs · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Ø Internal flywheel: 61.5 mm · Area of application: Tuning · Weight: 340 g
EUR 357.40
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Ø cable: 7 mm · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Weight: 424 g · Ø Flywheel outside: 62 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: Tuning
EUR 333.60
HPI flywheel (Bosch/Ducati)
Material: Steel · Manufacturer: HPI · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Thread type: MF27x1 LH (fine/left-hand thread) · Cone ratio: 1:5
EUR 114.30
HPI stator ignition
Material: Aluminum · Surface: anodized · Color: black · Manufacturer: HPI · Ø outside: 90 mm · Number of fixing points: 6 pcs · Tension: 12 V · Ø inside: 27.5 mm · Performance: 60 W · Number of cables: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Cable length: 640 mm · Ø bolt circle: 80 mm
EUR 178.60
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Number of fixing points: 10 pcs · Material: Aluminum · Surface: anodized · Color: black · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø outside: 120 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Weight: 87 g
EUR 71.40
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Material: Chrome steel (known as Nirosta®) · Surface: blank · Thickness: 1.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 117 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Ø inside: 71.8 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 101 mm · Weight: 100 g
EUR 23.70
Hot 
HPI ignition box programmable (two ignition curves)
Material: Plastic · Color: red · Total length: 63 mm · Width: 100 mm · Height: 28 mm · Manufacturer: HPI · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Ø mounting hole: 7.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 363.40
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 11.80
EUR 26.22/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Mounting type: Screws · Number of fixing points: 6 pcs · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Ø Internal flywheel: 61.5 mm · Area of application: Tuning · Weight: 340 g
EUR 357.40
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Number of fixing points: 10 pcs · Material: Aluminum · Surface: anodized · Color: black · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø outside: 120 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Weight: 87 g
EUR 71.40
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Material: Chrome steel (known as Nirosta®) · Surface: blank · Thickness: 1.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 117 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Ø inside: 71.8 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø bolt circle: 101 mm · Weight: 100 g
EUR 23.70
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 446.80
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Material: Aluminum · Surface: anodized · Color: red · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 120 mm · Number of fixing points: 10 pcs · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Weight: 87 g
EUR 74.50
Collection only possible with online purchase and appointment.
