Additional weight made of stainless steel suitable for HPI ignitions from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds with blower.
The weight is mounted underneath the blower wheel in the accessory.
The weight is mainly used to increase the flywheel mass.
The additional weight means that the engine runs more smoothly when stationary and starting is easier without stalling the engine, which is often the case with a lighter flywheel.
Exceptional product for the highest demands of the swiing® quality brand.
| Thickness | 1.8 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Area of application | Performance, Racing, High End, Tuning |
| Ø inside | 71.8 mm |
| Ø outside | 117 mm |
| Ø mounting hole | 5 mm |
| Ø bolt circle | 101 mm |
| Number of fixing points | 4 pcs |
| Weight | 100 g |
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Material: Aluminum · Material: Steel · Manufacturer: HPI · Number of fixing points: 6 pcs · Ø Internal flywheel: 61.5 mm · Light coil voltage: 12 V · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Area of application: Tuning · Weight: 340 g
EUR 358.80
HPI racing ignition clockwise without light
Material: Aluminum · Material: Steel · Manufacturer: HPI · Number of fixing points: 3 pcs · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Mounting type: Screws · Area of application: Tuning · Weight: 424 g
EUR 334.90
HPI flywheel (Bosch / Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Thread type: MF27x1 LH (fine/left-hand thread) · Weight: 337 g
EUR 114.70
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Surface: anodized · Color: black · Tension: 12 V · Performance: 60 W · Ø outside: 90 mm · Cable length: 640 mm · Ø inside: 27.5 mm · Number of cables: 4 pcs · Ø bolt circle: 80 mm · Number of fixing points: 6 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 179.30
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø inside: 39 mm · Ø outside: 120 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g
EUR 71.70
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø mounting hole: 5 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Weight: 250 g
EUR 31.00
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Hole spacing: 80 mm · Material: Plastic · Color: red · Ø mounting hole: 7.5 mm · Number of fixing points: 2 pcs · Total length: 63 mm · Width: 100 mm · Height: 28 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 364.70
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Material: Steel · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs · Area of application: Standard
EUR 2.85
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 13.00
EUR 28.89/l
HPI racing ignition 12V with light 60W
Material: Aluminum · Material: Steel · Manufacturer: HPI · Number of fixing points: 6 pcs · Ø Internal flywheel: 61.5 mm · Light coil voltage: 12 V · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Area of application: Tuning · Weight: 340 g
EUR 358.80
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø inside: 39 mm · Ø outside: 120 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g
EUR 71.70
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø mounting hole: 5 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Weight: 250 g
EUR 31.00
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing® ingenious parts · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 448.50
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø inside: 39 mm · Ø outside: 120 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g
EUR 74.80
Working late? Evening hours on Thursday until 20:00
