GPO 45 mm tuning cylinder suitable for various Puch mopeds (Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 NG-2A, as well as Puch Supermaxi).
In order to get the full power out of the cylinder, a racing exhaust and a larger carburetor should be fitted.
The matching stud bolts for the intake and exhaust can be found in the accessories.
Scope of delivery as shown in Figure 1.
This racing kit is also offered in other stores under the names DMP, PSR, Power One or Akoa. However, it is actually just a good, inexpensive standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 70 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 45 mm |
| Ø cylinder neck | 47.8 mm |
| Ø outlet inside | 23.4 mm |
| Inlet window | 21.4 x 13.5 |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | No |
| Camouflaged | No |
| Hole spacing inlet | 38 mm |
| Area of application | Tuning |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø cylinder: 45 mm · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.20
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Diameter: 5.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 38 mm · Thread type: M6x1 (standard thread) · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
EUR 2.40
swiing 15 mm carburetor set camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Camouflaged: Yes · Nozzle size: 62 · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 125.00
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Ø outside: 15 mm · Ø inside: 12 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 14.20
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Ø outside: 70 mm · Manufacturer: swiing · Total length: 730 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Screwed clamp · Exhaust type: Cigar · Ø Internal connection: 28 mm · Flame tube attachment: Flange
EUR 142.90
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder
EUR 2.85
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø cylinder: 45 mm · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 39.20
Flame tube 28 mm chrome | Puch Maxi S, N / X30 Sport
Manufacturer: Made in Portugal · Material: Steel · Ø outside: 28 mm · Color: Chrome · Total length: 295 mm · Surface: chrome-plated · Ø inside: 24 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
EUR 20.10
Hot 
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Thread length: 11 mm · Thread length: 15 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Thread type: MF10x1 (fine pitch thread) · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 968 g · Number of gears: 1 pcs
EUR 214.40
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 65 mm · Nominal diameter: 17 mm · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Width: 47 mm · Height: 89 mm · Height: 109 mm · Area of application: Tuning
EUR 142.90
Hot
GPO 45 mm cylinder head Racing high-compression | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Number of fixing points: 4 pcs · Ø screw holder: 7.4 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Tuning
EUR 59.50
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total height: 53.5 mm · Ø inside: 17 mm · Total length: 38 mm · Height flange center hole: 42 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Ø External connection: 23 mm · Camouflaged: Yes · Hole spacing inlet: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 53.50
Collection only possible with online purchase and appointment.
