41 mm racing cylinder with 55 cc, suitable for Sachs mopeds / mopeds with 503 2AL, AAL, 2BL, ABL CH engines.
Thanks to the additional holes for the cylinder head bolts as well as the two mounts for the blower cover, the cylinder can also be fitted to the Sachs 50/2 and 502 models, in which case the intake and exhaust accessories must be made by yourself.
The large displacement and the huge intake ensure plenty of torque.
The cylinder can be used on both Sachs 50/2 and Sachs 503 mopeds with the original cylinder head, but it should be noted that the pinch point at the narrowest point should be at least 1.5 mm. To ensure optimum operation and thus tease the maximum power out of the cylinder, we recommend using the 41 mm cylinder head from the accessories.
We also recommend using reinforced clutch springs so that the entire engine power can be transferred to the rear wheel. You can find these in the accessories section.
The BADASS 17 mm or 15 mm intake manifold is a perfect match for the cylinder and can be used with either a 15 mm Bing SRE or a 17 mm carburettor.
You can find the intake manifolds, as well as carburetors, in the accessories section.
Details:
- Cast iron reproduction cylinder with Ø 41.0 mm bore
- slot-controlled
- Ø 19 mm intake
- optimized Öoverflow channels
- improved timing
- no spindling of the engine housing necessary (Ø cylinder neck 45.0 mm)
- Ø external exhaust manifold connection: 26 mm
- incl. Ø 41 mm piston from the Italian manufacturer -GOL-
Differences to the GPO Pomodoro – replica cylinder:
- The BADASS 15 mm & 17 mm intake manifolds fit perfectly on the cylinder
- It is not possible to fit original or swiing® intake manifolds
- Thanks to the holes for the cylinder head and the blower cover, there is the possibility to mount the BADASS 15 mm & 17 mm intake manifold;the possibility of adapting the cylinder to a 50/2 or 502 engine
- Lower intake timing compared to the GPO Pomodoro
Installation instructions in German and the matching piston are included in the scope of delivery.
Attention: It is essential to replace the rubber silencers on 503 BL engines with aluminum silencers due to the increased performance in order to avoid fatigue fracture of the exhaust flange.
The aluminum silentblocs, matching gaskets, reinforced clutch springs and other add-on parts such as intake manifolds, carburettors, exhausts, etc. can be found in the accessories section.
Made by the BADASS brand.
Hole pattern [mm]: 59 x 40 · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Tuning
| Nominal diameter | 41 mm |
| Manufacturer | BAD ASS |
| Material | Gray cast iron |
| Camouflaged | No |
| Surface | sandblasted |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 45 mm |
| Ø Outlet outside | 26 mm |
| Ø outlet inside | 23 mm |
| Ø Inlet inside | 19 mm |
| Ø piston pin (B) | 12 mm |
| Thread inlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Outlet type | clamped |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
| Hole spacing inlet | 32 mm |
| Area of application | Tuning |
| Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
17 mm Bing SRF carburetor (replica)
Material: Aluminum · Nominal diameter: 17 mm · Total length: 78 mm · Width: 64 mm · Height: 117 mm · Mounting type: Plug connection clamped · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Area of application: Tuning · Ø fuel hose connection: 6 mm · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.xx · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 77.40
swiing® revival nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Total length: 6 mm
EUR 19.00
swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Hole spacing inlet: 32 mm · Ø Inside entrance: 15 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Tuning · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 190.60
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø Internal connection: 20 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m
EUR 95.20
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Area of application: Tuning · Color: black · Filter type: Racing screen · Ø Internal connection: 20 mm · Total length: 165 mm · Width: 68 mm · Height: 52 mm · Mounting type: Plug connection clamped
EUR 64.20
EUR 71.40
swiing® revival cylinder base gasket 0.3 mm | Sachs 503
Nominal diameter: 45 mm · Manufacturer: swiing® revival parts · Material: Oiled paper · Place of use: Cylinder base · Ø inside: 45 mm · Thickness: 0.3 mm · Ø cylinder: 38 - 40 mm · Hole pattern [mm]: 60 x 40 · Area of application: Standard
EUR 4.05
swiing resonance exhaust set Ø 28 / 70 mm | Sachs 503
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Ø Internal connection: 28 mm · Total length: 730 mm · Exhaust type: Cigar · Flame tube attachment: Plug connection clamped · Mounting type: Screwed clamp
EUR 150.10
EUR 166.70
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Nominal diameter inside: 8.5 mm · Ø outside: 21.95 mm · Ø inside: 8.3 mm · Ø Bundle: 26 mm · Total length: 13 mm · Alternative version of the Pony OEM number: A4286 · Alternative version of the Sachs OEM number: 0251 121 000
EUR 28.50
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: GPO · Thick piston ring: 1.8 mm · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Piston weight: 86 g
EUR 47.60
Hot 
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Material: Aluminum · Manufacturer: BAD ASS · Mounting type: Screws · Number of fixing points: 3 pcs · Camouflaged: No · Ø inside: 17 mm · Area of application: Tuning · Ø External connection: 23 mm · Total length: 54 mm · Thread type: M6x1 (standard thread) · Height flange center hole: 45 mm · Hole spacing inlet: 32 mm · Total height: 56.5 mm
EUR 89.30
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRF · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Total length: 61.5 mm · Width: 47 mm · Height: 89 mm · Height: 112 mm · Area of application: Tuning
EUR 142.90
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Material: Aluminum · Manufacturer: BAD ASS · Mounting type: Stud bolt · Number of fixing points: 2 pcs · Camouflaged: No · Ø inside: 17.8 mm · Area of application: Tuning · Ø External connection: 20 mm · Total length: 65 mm · Height flange center hole: 45 mm · Hole spacing inlet: 32 mm · Total height: 55 mm
EUR 89.30
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Thickness: 0.3 mm · Thickness: 1 mm · Material: Oiled paper · Area of application: Tuning · Number of components: 2 pcs · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Hole spacing inlet: 32 mm
EUR 17.30
Moped fans also bought
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Area of application: Standard · Surface: raw · Place of use: Carburetor · Color: black · Number of components: 1 pcs · Ø outside: 20 mm · Ø inside: 17.2 mm · Cord thickness: 1.4 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.45
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Material: Brass · Area of application: Standard · Material: Steel · Surface: blank · Ø outside: 40 mm · Ø inside: 15 mm · Width: 10 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.70
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø Internal connection: 20 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m
EUR 95.20
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 14 pcs · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40 · Hole spacing inlet: 32 mm
EUR 47.60
Hot
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Material: Aluminum · Manufacturer: BAD ASS · Mounting type: Screws · Number of fixing points: 3 pcs · Camouflaged: No · Ø inside: 17 mm · Area of application: Tuning · Ø External connection: 23 mm · Total length: 54 mm · Thread type: M6x1 (standard thread) · Height flange center hole: 45 mm · Hole spacing inlet: 32 mm · Total height: 56.5 mm
EUR 89.30
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Material: Aluminum · Manufacturer: BAD ASS · Mounting type: Stud bolt · Number of fixing points: 2 pcs · Camouflaged: No · Ø inside: 17.8 mm · Area of application: Tuning · Ø External connection: 20 mm · Total length: 65 mm · Height flange center hole: 45 mm · Hole spacing inlet: 32 mm · Total height: 55 mm
EUR 89.30
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Thickness: 0.3 mm · Thickness: 1 mm · Material: Oiled paper · Area of application: Tuning · Number of components: 2 pcs · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Hole spacing inlet: 32 mm
EUR 17.30
Collection only possible with online purchase and appointment.
