Bladed 45 mm (70 cc) cylinder kit with 12 mm piston pin, suitable for your Puch X30 Velux and on your Puch X30 NG-2AH moped / moped.
The timing of the cylinder was kept rather low, which is characterized by a very nice torque in the lower speed range.
The racing cylinder kit without sealing includes cylinder & piston kit.
- Grey cast iron reproduction cylinder with & 45.0 mm bore
- Slot-controlled
- Ø 19 mm intake, 32 mm stud spacing
- Optimized overflow channels
- Improved timing
- Spindling of the engine gearbox necessary (Ø cylinder neck 49.0 mm)
- Ø 25 mm outlet, 42 mm stud bolt spacing
- Hole pattern for stud bolts: 44 x 44 mm
- Incl. Ø 45 mm piston from the Italian manufacturer GOL
Scope of delivery according to illustrations
Notes:
For Puch Velux engines, the slot on the housing no longer needs to be cast on thanks to the large sealing surface.
For ZA50-G engines, the housing may need to be spindled on.
The cylinder kit can also be used on DS, MV, MS, VZ (EX50) engines, provided the housing is spindled on.
Full assembly instructions are enclosed. Please note the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
| Manufacturer | BAD ASS |
| Material | Gray cast iron |
| Area of application | Tuning |
| Displacement | 70 ccm |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 45 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 49 mm |
| Ø Outlet outside | 26 mm |
| Ø outlet inside | 25 mm |
| Ø Inlet inside | 19 mm |
| Hole pattern [mm] | 44 x 44 |
| Thread inlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole spacing inlet | 32 mm |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Hole spacing inlet: 32 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø Internal connection: 20 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Choke control: Hand choke · Area of application: Tuning
EUR 147.00
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 171.00
swiing® revival stud bolt set M6x30 (10.9 strength) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 6 mm · Drive: External hexagon · Total length: 30 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Nominal diameter (thread): 6 mm · Strength class: 8 · Strength class: 10.9 · Thread length: 12 mm
EUR 12.80
GOL Piston 45 mm BAD ASS Lucifer BigBore | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Ø outside piston (A): 44.94 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 45 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Weight piston kit: 105 g
EUR 83.60
GPO cylinder gasket set BAD ASS Lucifer 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Number of components: 4 pcs · Material: Aluminum · Material: Sealing paper · Ø cylinder: 45 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø outlet inside: 27 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Area of application: Tuning · Decompressor: Yes
EUR 23.80
swiing® ingenious 45 mm cylinder head | Puch EX30 (Z50), ZA50 (fan-cooled)
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø cylinder: 45 mm · Ø outside: 90 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Racing · Area of application: Tuning · Decompressor: No
EUR 71.70
Explore categories from Cylinder
Moped fans also bought
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 16.2 mm · Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 16.2 · Tomos OEM number: 035548
EUR 16.60
swiing® ingenious exhaust manifold 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 380 mm · Mounting type: Stud bolts & nuts · Ø outside: 28 mm · Ø inside: 25 mm · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
EUR 47.70
swiing® ingenious 17 mm intake manifold | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Surface: anodized · Ø inside: 17 mm · Ø External connection: 23 mm · Hole spacing inlet: 32 mm · Mounting type: Stud bolt · Number of fixing points: 2 pcs · Area of application: Tuning
EUR 59.70
GPO cylinder gasket set BAD ASS Lucifer 45 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Number of components: 4 pcs · Material: Aluminum · Material: Sealing paper · Ø cylinder: 45 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø outlet inside: 27 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Area of application: Tuning · Decompressor: Yes
EUR 23.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
