Throttle cable elbow, including cable adjustment screw, compatible with various mopeds and small motorcycles equipped with Bing 85, 17, or 18 carburetors.
These carburetors are installed on the Puch X30 Sport, Puch Supermaxi LG1 & LG2, Sachs 503 ADV, and Sachs 504 / 535 mopeds.
The throttle cable guide tube features an M7 x 0.75 mm mounting thread.
You can find additional carburetor bends and throttle cables in the accessories section.
| Component group Carburetor | Adjusting screws, float, etc. |
| Ø outside | 7 mm |
| Material | Brass |
| Total length | 47 mm, 53.5 mm |
| Carburetor type | 85, 18 Catalyst |
| Thread type | MF7x0.75 (fine pitch thread) |
| Internal thread | MF6x0.75 (fine pitch thread) |
| Angle | 90 ° |
| Width across flats nut | 10 mm, 8 mm |
| Height | 29 mm |
| Pony OEM number | A2066 |
| Sachs OEM no. | 0261 132 000 |
| Puch | E50 ZA50 (air-cooled) |
| Sachs | 503 - ADV 535 |
Accessories & related products
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder
EUR 2.85
Dell'Orto 90° carburetor pipe bend set M6x0.75
Ø outside: 6 mm · Height: 27 mm · Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Total length: 43 mm · Total length: 52 mm · Width across flats nut: 7 mm
EUR 14.20
Dell'Orto 50° carburetor elbow set M6x0.75
Ø outside: 6 mm · Height: 40 mm · Height: 48 mm · Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 50 ° · Total length: 36.5 mm · Total length: 42 mm · Width across flats nut: 7 mm
EUR 14.20
Dell'Orto 40° carburetor elbow set M6x0.75
Ø outside: 6 mm · Height: 57 mm · Height: 67 mm · Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 40 ° · Total length: 30.5 mm · Total length: 37.5 mm · Width across flats nut: 7 mm
EUR 14.20
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 41.5 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Height: 35 mm · Angle: 80 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.25
BING 90° carburetor pipe bend M7x0.75 NOS
Ø outside: 7 mm · Height: 25 mm · Manufacturer: BING · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF7x0.75 (fine pitch thread) · Carburetor type: 85 · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 90 ° · Total length: 38 mm · Total length: 45 mm · Width across flats nut: 9 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 29.80
90° carburetor pipe bend M7x0.75
Ø outside: 7 mm · Height: 29 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF7x0.75 (fine pitch thread) · Carburetor type: 18 Catalyst · Carburetor type: 85 · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 90 ° · Total length: 47 mm · Total length: 53.5 mm · Width across flats nut: 8 mm · Width across flats nut: 10 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 14.20
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 40 mm · Total length: 49 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Height: 32 mm · Angle: 90 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.25
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder
EUR 2.85
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears
EUR 2.85
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Thread type: M4x0.7 (standard thread)
EUR 2.40
GPO 85° Carburetor Elbow M6x0.75
Manufacturer: GPO · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: M5x0.8 (standard thread) · Thread type: MF6x0.75 (fine pitch thread) · Height: 30 mm · Angle: 85 ° · Width across flats nut: 8 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.05
Magura Cable Clamp Ø 6 x 9 mm
Manufacturer: Magura · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 6 mm · Total length: 9 mm · Thread length: 5 mm · Thread type: M4x0.7 (standard thread) · Width across flats: 6 mm · Magura OEM number: 301 190
EUR 2.40
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 40 mm · Total length: 49 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Height: 32 mm · Angle: 90 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.25
Working late? Evening hours on Thursday until 20:00
