Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 260 mm
Outer diameter of coil spring: 44 mm
Holt diameter: 28 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
Details
| Manufacturer | Xtreme |
| Surface | varnished |
| Damping type | Spring |
| Adjustable | Yes |
| Ø Fastening inside | 10 mm |
| Ø spars | 28 mm |
| Ø outside | 44 mm |
| Hole spacing | 260 mm |
| Number of fixing points | 2 pcs |
| Color | black |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.10
EUR 2’610.00/l
MKX shock absorber 26 cm chrome
Manufacturer: MKX · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Ø outside: 46 mm · Hole spacing: 260 mm · Number of fixing points: 2 pcs · Color: Chrome · Mounting type: Nuts & bolts
EUR 59.60
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Total length: 15 mm · Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Thread type: M6x1 (standard thread) · Drive: Slot · Thread length: 7 mm · Ø Cable bushing: 2.3 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Width across flats SW: 7 mm · Ø outside: 8 mm
EUR 3.00
Spotlight round Ø 13 cm chrome / black
Depth: 80 mm · Width: 134 mm · Height: 147 mm · Material: Sheet metal (steel) · Area of application: Standard · Test mark: none · Surface: chrome-plated · Surface: varnished · Color: Chrome · Housing material: Metal · Color: black · Color: transparent · Thread size: M6 · Lens material: Plastic · Bulb holder: BA15d · Number of fixing points: 2 pcs · Ø outside: 130 mm · Speedometer recording: None · Switch included: No · Battery operated: No · Mounting type: Screws
EUR 29.70
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.80
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 15.40
Collection only possible with online purchase and appointment.
