Socket axle M12x218 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels and rear wheels. Due to the large width, it is increasingly used as a rear wheel axle. If necessary, the threaded shaft must be shortened on both sides.
The complete rear axle set is also equipped with the following parts:
- 2 pieces of M12 x 1 nuts (SW19 / 10 mm)
- 1 piece of spacer washer (Ø 24 x 2.8 mm)
- 2 pieces of bearing cone (D20 x d14 mm / SW17)
- 2 pieces of bearing shells (Ø outside: 29.3 / Ø inside: 26 mm / Ø bore: 15.5 mm / length: 9.2 mm)
- 1 piece M12 x 1 nuts (SW17 / 5 mm)
- 2 pieces dust ring (Ø outer: 29.15 mm / Ø inner: 20.5 mm / thickness: 0.4 mm)
To ensure that you can enjoy your new axle for a long time, we recommend that you order the higher-quality swiing cones in the accessories section at the same time.
You can find more axle parts in the accessories section.
| Surface | galvanized (blue) |
| Material | Steel |
| Ø shaft | 12 mm |
| Total length | 218 mm |
| Thread length | 78 mm |
| Shank length | 71 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Puch | |
| Sachs |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (known as Nirosta®) · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Drive: External hexagon · Strength class: A2-70 · Thread type: MF12x1 (fine pitch thread) · Height: 10 mm · Width across flats SW: 19 mm
EUR 4.65
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.10
EUR 2’610.00/l
66HEROES cap nut M12x1 stainless steel polished
Material: Chrome steel (known as Nirosta®) · Surface: polished · Drive: External hexagon · Height: 26.2 mm · Manufacturer: 66HEROES · Nut type: Cap nut · Thread type: MF12x1 (fine pitch thread) · Thread depth: 23.4 mm · Width across flats SW: 17 mm
EUR 14.20
Moped fans also bought
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Nipple length: 10 mm · Number of components: 1 pcs
EUR 2.85
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (known as Nirosta®) · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Drive: External hexagon · Strength class: A2-70 · Thread type: MF12x1 (fine pitch thread) · Height: 10 mm · Width across flats SW: 19 mm
EUR 4.65
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Height: 5.8 mm · Width across flats SW: 19 mm · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.15
FAG 16101 A 2RS wheel bearing 12/30/8
Stock number: 16101 · Inner ring width: 8 mm · Manufacturer: FAG · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Area of application: Standard · Ø inside: 12 mm · Bearing type: Deep groove ball bearing · Ø outside: 30 mm · Width: 8 mm · Ball bearing closed: Yes
EUR 17.50
Collection only possible with online purchase and appointment.
