Wonderful «Ciao» tank emblem made of silicone for your Piaggio Ciao moped / moped.
The chrome-colored sticker with orange border is a visual highlight and gives your Ciao that certain something extra.
The change from the small to the large stickers took place in the middle of the SC model series. As a result, this 109x25 mm sticker fits into all large fuel tank entries of the SC, PX and C24 models.
This 3D sticker was applied at the factory in Switzerland to the last models produced before 2006. Earlier models were supplied with either the aluminum tank sticker or the «Piaggio» 3D sticker with a silver background.
Dimension: 109x25x1.2 mm
Material: silicone
Durability: petrol-resistant
Price per piece.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the sticker.
Suitable cleaning cloths can be found along with other decals in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 814489
Alternative to the original Piaggio spare part number: 298723, 813875
| Manufacturer | Piaggio |
| Material | Silicone |
| Color | Chrome, orange |
| Width | 109 mm |
| Height | 25 mm |
| Thickness | 1.2 mm |
| Rear side texture | Adhesive |
| Piaggio OEM number | 814489 |
| Alternative version of the Piaggio OEM number | 298723, 813875 |
| Piaggio | Ciao - C24 |
Accessories & related products
Tank sticker "Ciao" 3D silicone 115 x 27 mm original | Piaggio Ciao
Height: 27 mm · Width: 115 mm · Manufacturer: Piaggio · Material: Silicone · Thickness: 2 mm · Rear side texture: Adhesive · Mounting type: glue · Alternative version of the Piaggio OEM number: 298723 · Piaggio OEM number: 813875 · Alternative version of the Piaggio OEM number: 814489
EUR 15.40
Tank sticker "PIAGGIO" 3D silicone 115 x 27 mm original | Piaggio Ciao, SI, Bravo
Height: 1.5 mm · Width: 27 mm · Manufacturer: Piaggio · Material: Silicone · Place of use: Tank (+ frame) · Color: black · Color: silver · Rear side texture: Adhesive · Consistency: petrol resistant · Total length: 115 mm · Puch OEM number: 298723
EUR 15.40
Sticker gel "KAT" left & right side protection | Piaggio Ciao, SI, Grillo
Height: 22 mm · Width: 155 mm · Place of use: Housing cover · Material: Silicone · Surface: rubberized · Color: black · Color: gold · Color: gray · Color: yellow · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Border: contour cut
EUR 25.60
Moped fans also bought
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Nipple length: 10 mm
EUR 2.85
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
EUR 35.60
swiing® revival clamping screw rear brake | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Thread type: M7x1 (standard thread) · Material: Steel · Surface: galvanized (blue) · Number of components: 3 pcs · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Ø Cable bushing: 2.1 mm · Drive: External hexagon · Screw head: Hexagon · Ø shaft: 10.5 mm · Total length: 21.5 mm · Thread length: 11 mm · Alternative version of the Piaggio OEM number: 154533
EUR 6.90
GPO license plate holder Inox black (CH version)
Height: 6 mm · Width: 105 mm · Manufacturer: GPO · Thread type: M5x0.8 (standard thread) · Material: Chrome steel (known as Nirosta®) · Surface: varnished · Color: black-matt · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm · Total length: 147 mm
EUR 15.40
Collection only possible with online purchase and appointment.
