Set of galvanized M6 threaded bolts and flange nuts with increased strength for the intake, exhaust or cylinder base mounting of various mopeds, mopeds and small motorcycles (Puch, Sachs, Zündapp, etc.).
.These extended stud bolts can also be used when fitting a lift plate. The original cylinder stud bolts are usually too short.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Drive | External hexagon |
| Thread length | 20 mm, 12 mm |
| Width across flats | 10 mm |
| Thread type | M6x1 (standard thread) |
| Strength class | 10.9, 8 |
| Total length | 38 mm |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.20
EUR 2’620.00/l
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Diameter: 5.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Thread length: 11 mm · Thread length: 19 mm · Total length: 38 mm · Strength class: 10.9
EUR 2.40
swiing® ingenious stud bolt set M6 / M5 Sachs (12.9 strength) Special
Diameter: 6 mm · Manufacturer: swiing® ingenious parts · Total length: 27.3 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread length: 9.5 mm · Thread length: 14 mm · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Width across flats: 8 mm · Strength class: 10 · Strength class: 12.9 · Drive: External hexagon
EUR 23.10
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Area of application: Standard
EUR 2.85
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Tuning · Number of components: 4 pcs · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing inlet: 38 mm · Decompressor: Yes
EUR 11.80
swiing® revival stud bolt set M6 x 106 | Puch
Total length: 106 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.85
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Total length: 66 mm · Manufacturer: swiing® ingenious parts · Width: 50 mm · Height: 95 mm · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 95.50
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 6 mm · Thread type: M6x1 (standard thread) · Total length: 30 mm · Thread length: 12 mm · Width across flats: 10 mm · Strength class: 8 · Strength class: 10.9 · Drive: External hexagon
EUR 12.80
Collection only possible with online purchase and appointment.
