Fork sleeve compatible with the Pony Junior, Pony City, Pony Cross, early GTA models, KTM Hobby 3, GP 40, or some Alpa mopeds.
The sleeve for the fork leg is made of a special plastic compound with excellent sliding properties.
It is recommended to apply additional grease to the sliding sleeve when installing it in the fork.
Four pieces are needed per fork.
Price per piece.
Note: The use of these fork sleeves has been tested on original fork legs.
The fit with aftermarket products has not been tested.
A nostalgic product meeting the highest standards of the swiing® quality brand.
Original Pony part number: P217
| Manufacturer | swiing® revival parts |
| Material | Plastic |
| Color | red |
| Total length | 32 mm |
| Ø Bundle | 26.2 mm |
| Ø inside | 23.8 mm |
| Pony OEM number | P0217 |
| Sachs | 503 - AAL , ABL , 2AL / 2BL 504 (without pedal shaft) 502 1A / 1B (torpedo) |
| KTM |
Accessories & related products
EBR fork | Sachs Pony Junior 503, 504
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Adjustable: No · Ø spars: 23 mm · Color: Chrome · Color: black · Spar end distance (center-center): 120 mm · Ø outer head tube: 25.65 mm · Ø head tube inside: 24.3 mm · Head tube length: 205 mm · Total length: 595 mm · Fork bridge - center wheel axle: 375 mm · Distance brake cam to wheel axle center-center: 35 mm · Distance brake cam to wheel axle center-center: 85 mm · Thread type: FG25.4 (1" 24G) · Thread length: 58 mm
EUR 239.10
Explore categories from Fork
Moped fans also bought
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Area of application: Standard · Material: Steel · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm · Ball bearing closed: No
EUR 9.45
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.40
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Area of application: Standard · Material: Rubber · Surface: raw · Place of use: Carburetor · Number of components: 1 pcs · Color: black · Ø inside: 17.2 mm · Ø outside: 20 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.45
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing type: Shoulder bearing · Stock number: BO15 · Inner ring width: 10 mm · Manufacturer: NSK · Bearing cage: Brass cage ball-guided · Area of application: Standard · Material: Brass · Material: Steel · Width: 10 mm · Ø inside: 15 mm · Ø outside: 40 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.80
swiing® revival sprocket mounting M12x1 (nut & spring washer) | Sachs / Hercules
Height: 5 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Nominal diameter (thread): 12 mm · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Pony OEM number: A1720 · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000 · Sachs OEM no.: 0244 189 110
EUR 4.65
Large gasket set with shaft seals Engine | Sachs 503
Area of application: Standard · Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 14 pcs · Hole spacing inlet: 32 mm · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40
EUR 47.70
Working late? Evening hours on Thursday until 20:00
