profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
logo_swiing ingenious parts

For: Sachs · Pony / Cilo (Beta 521 & 512)

38650

swiing® ingenious rear wheel axle set | Pony GTX 503, GTX 521

rating iconrating iconrating iconrating iconrating icon
No reviews
EUR 51.30

Incl. 22% VAT.

Description

Special rear wheel conversion kit with industrial bearings and complete wheel axle, suitable for the rear wheel of your Pony GTX 503 and GTX 521 mopeds / mopeds.

The benefits of this conversion kit include improved stability, reduced vibrations and longer bearing life.

The kit is equipped with two ball bearings from the world's leading manufacturer SKF, complemented by precise steel spacers and a complete axle set from the quality brand swiing® ingenious.

The colored cable ties show you where to mount which component:

  • Green cable tie: brake anchor plate
  • Blue cable ties: wheel tensioner
  • Red cable tie: wheel hub

Notes:
The ponies are equipped with different types of rims ex works. This wheel axle is intended for rims that have a bearing seat for a 32 mm ball bearing on one side and a bearing seat for a 30 mm ball bearing on the other side.
Note also that the brake anchor plate must be drilled out from 11 to 12 mm.

You can find more wheel axles as well as chain tensioners and a bearing press-in tool in the accessories section.

Sophisticated product for the highest demands from the quality brand swiing®.

Manufacturerswiing® ingenious parts
MaterialSteel
Surfacegalvanized (blue)
Thread typeMF12x1.25 (fine pitch thread)
Total length175 mm
Width across flats17 mm
Ball bearing closedYes
Sachs

503

Pony / Cilo (Beta 521 & 512)

Pony GTX 521 (frame)

Accessories & related products

GPO wheel clamp 12 mm cranked reinforced (per piece)
undefined

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Bye Bike

22527

GPO wheel clamp 12 mm cranked reinforced (per piece)

Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Ø inside: 13.1 mm · Ø outside: 23.7 mm · Total length: 75 mm · Thread length: 35 mm · Cranking (offset): 6 mm

EUR 3.45

SKF 16101 2RS1 ball bearing 12/30/8
undefined

For: Universal · Puch · Sachs

29206

SKF 16101 2RS1 ball bearing 12/30/8

Bearing type: Deep groove ball bearing · Stock number: 16101 · Ø inside: 12 mm · Ø outside: 30 mm · Width: 8 mm · Inner ring width: 8 mm · Manufacturer: SKF · Ball bearing closed: Yes · Dust protection type: 2RS1 - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Groove ring: No · Material: Plastic · Material: Steel · Area of application: Standard

EUR 19.50

SKF 6201 2RSH ball bearing 12/32/10
undefined

For: Universal · Puch · Sachs

29209

SKF 6201 2RSH ball bearing 12/32/10

Bearing type: Deep groove ball bearing · Stock number: 6201 · Ø inside: 12 mm · Ø outside: 32 mm · Width: 10 mm · Inner ring width: 10 mm · Manufacturer: SKF · Ball bearing closed: Yes · Dust protection type: 2RSH - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided

EUR 11.90

BGS hot air gun 400 °C / 600 °C
undefined
angle-right

Universal

29784

BGS hot air gun 400 °C / 600 °C

Manufacturer: BGS · Area of application: Power tool · Color: blue · Tension: 230 V · Performance: 2000 W

EUR 58.50

swiing® ingenious bearing press-on plunger Ø 12/32 mm (type 6201)
undefined

For: Universal · Puch · Sachs · Tomos

34673

swiing® ingenious bearing press-on plunger Ø 12/32 mm (type 6201)

Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Aluminum · Surface: anodized · Number of components: 2 pcs · Total length: 52.5 mm · Ø inside: 12 mm · Ø outside: 32 mm · Ø Pin: 12 mm

EUR 29.80

swiing® revival rear wheel axle set | Pony GTX 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35726

swiing® revival rear wheel axle set | Pony GTX 521

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Ø shaft: 11.95 mm · Total length: 175 mm · Thread length: 21 mm · Shank length: 133 mm · Ball bearing closed: Yes

EUR 51.30

Explore categories from Hub & axle

S-20-50-030-10_Achse
Axis
S-20-50-030-15_Lagerung
Storage
S-20-50-030-20_Distanzhuelsen
Spacer sleeves
S-20-50-030-30_Freilauf
Freewheel
S-20-50-030-40_Muttern
Nuts
S-20-50-030-50_Nabenkoerper
Hub shell
S-20-50-030-60_Radspanner
Wheel tensioner
S-20-50-030-70_Schrauben-Sicherung
Screws & fuse

Moped fans also bought

NewFren brake shoes Ø 90 x 17
undefined

Universal

10370

NewFren brake shoes Ø 90 x 17

Slotted: No · Manufacturer: NewFren · Color: silver · Ø drum: 90 mm · Springs included: Yes · Width: 17 mm · Ø locating bolt: 10 mm · Number of springs: 1 pcs · Area of application: Standard

EUR 15.40

Bottom bracket washer 16x28x0.5 mm

For: Universal · Puch · Sachs

20530

Bottom bracket washer 16x28x0.5 mm

Ø inside: 16.1 mm · Nominal diameter inside: 16 mm · Nominal diameter (thread): 16 mm · Ø outside: 28 mm · Thickness: 0.5 mm

EUR 1.55

swiing® revival nozzle set (6 pieces of your choice) Bing SSB | Sachs 502, 50/2, 50/3, 50/4
undefined
angle-right

For: Sachs

23228

swiing® revival nozzle set (6 pieces of your choice) Bing SSB | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SSB · Nozzle type: Main nozzle · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Drive: External hexagon · Width across flats: 8 mm

EUR 41.80

swiing® ingenious front wheel bearing conversion kit | Pony GTX 521, Cross 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35856

swiing® ingenious front wheel bearing conversion kit | Pony GTX 521, Cross 521

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 11.25 mm · Ball bearing closed: Yes

EUR 35.30

swiing® ingenious wheel axle to bearing conversion kit front wheel 17" | Pony GTX 521
undefined

For: Pony / Cilo (Beta 521 & 512)

35857

swiing® ingenious wheel axle to bearing conversion kit front wheel 17" | Pony GTX 521

Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 145 mm

EUR 47.70

swiing® ingenious wheel axle with bearing conversion kit front wheel cast rim 17" | Pony GTX 521
undefined
angle-right

For: Pony / Cilo (Beta 521 & 512)

35858

swiing® ingenious wheel axle with bearing conversion kit front wheel cast rim 17" | Pony GTX 521

Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 145 mm · Ball bearing closed: Yes

EUR 71.70