Set 15 mm tuning intake manifold suitable for your Puch Maxi S / N moped / moped with 1-speed E50 engine.
From the factory, the original counterpart with 14 mm diameter and round intake window was installed on Austrian Puch mopeds.
The tuning intake manifold is therefore additionally provided with an embedded «14» for camouflage. When installed, the intake manifold is therefore visually indistinguishable from the original.
The cylinder-side shape corresponds to the intake window shape used by various racing engines, such as those used by swiing® or Airsal, among others.
| Ø inside | 15 mm |
| Manufacturer | swiing® ingenious parts |
| Camouflaged | Yes |
| Material | Aluminum |
| Ø External connection | 20 mm |
| Mounting type | Nuts |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 2 pcs |
| Total height | 52 mm |
| Height flange center hole | 40 mm |
| Puch | E50 |
Ratings
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Nominal diameter: 15 mm · Total length: 66 mm · Height: 95 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Tuning · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 95.60
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.80
swiing® revival 14 mm intake manifold round inlet (AT version) | Puch E50
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Aluminum · Ø inside: 14 mm · Ø External connection: 20 mm · Mounting type: Flange · Hole spacing inlet: 38.5 - 38 mm · Number of fixing points: 2 pcs · Total height: 52.5 mm · Height flange center hole: 42.5 mm · Total length: 45.5 mm · Area of application: Original
EUR 41.80
swiing® ingenious 4 mm intake gasket 15 mm intake manifold square | Puch E50, Z50, ZA50
Place of use: Admission · Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (colloquially known as Bakelite) · Nominal diameter: 15 mm · Ø screw holder: 6.2 mm · Thickness: 4 mm · Hole spacing inlet: 38 mm
EUR 9.00
Explore categories from Carburetor & intake system
Collection only possible with online purchase and appointment.
