Authentic fuel tank decal for your Puch X30 Turbo moped.
This is a high-quality, UV- and gasoline-resistant vinyl decal. To make installation easier, the decal has been mounted on a transfer sheet.
The surface to be covered should be free of grease and contaminants to ensure the sticker adheres firmly.
You can find appropriate cleaning cloths and additional stickers in the accessories section.
A nostalgic product from the premium swiing® brand that meets the highest standards.
| Place of use | Tank (+ frame) |
| Manufacturer | swiing® revival parts |
| Material | Polyvinyl chloride (PVC) |
| Width | 68 mm |
| Rear side texture | Adhesive |
| Consistency | UV-resistant |
| Color | white |
| Border | contour cut |
| Transferfolie | No |
| Height | 50 mm |
| Puch | ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) |
Accessories & related products
"Sport" White Tank Decal, 97 x 87, Vinyl Cut | Puch X30 NS, NG-2A
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Width: 97 mm · Height: 87 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Tank (+ frame) · Transferfolie: Yes
EUR 15.00
Sticker tank "sport" black 97 x 87 foil plot | Puch X30 NS
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Color: black · Width: 97 mm · Height: 87 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Tank (+ frame) · Transferfolie: Yes
EUR 16.60
"RACING" Black Fuel Tank Decal | Puch X30 NG-2AH
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Width: 105 mm · Height: 67 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Tank (+ frame) · Transferfolie: No
EUR 17.80
"RACING" White Fuel Tank Decal | Puch X30 NG-2AH
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Width: 96 mm · Height: 64 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Tank (+ frame) · Transferfolie: No
EUR 17.80
Sticker "X30" 68 x 50 mm black | Puch X30 Turbo
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Place of use: Tank (+ frame) · Color: black · Rear side texture: Adhesive · Consistency: UV-resistant · Height: 50 mm · Border: contour cut · Transferfolie: No · Width: 68 mm
EUR 23.60
Explore categories from Stickers & nameplates
Moped fans also bought
Adhesive kit tank white foil plot | Puch X30
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Color: white · Width: 290 mm · Height: 51 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: oil-resistant · Consistency: petrol resistant · Place of use: Tank (+ frame) · Transferfolie: Yes
EUR 22.60
Sticker "OEL-BENZINGEMISCH 1:50" 63 x 25 black | Puch
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Width: 63 mm · Height: 25 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Tank (+ frame) · Transferfolie: No
EUR 7.75
GPO sprocket 40 teeth black | Puch Maxi, Puch X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 40 pcs · Ø bolt circle: 106 mm · Ø inside: 94 mm · Ø mounting hole: 6.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs · Color: black
EUR 23.80
Hot 
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Ø outside: 11.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Width across flats: 19 mm
EUR 17.80
Working late? Evening hours on Thursday until 20:00
