Black fastening screw with a thread length of 37 mm for the side fairings of your Puch Supermaxi P1 XL moped / moped.
The clamping screw has the special two-part end head, as was standard on the P1 catalytic converter Maxi models.
Dimensions of the fairing screw:
Thread: M5
Thread length: 37 mm
Ø screw head: 21 mm
Original Puch spare part number: 535.062600
Details
| Color | black |
| Thread type | M5x0.8 (standard thread) |
| Ø External head | 21 mm |
| Thread length | 37 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Not so nice 
Main stand black extended | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 235 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 66.5 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 85 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 40 mm · Total height: 250 mm
EUR 26.10
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm · Drive: Slot · Drive: Triangular head
EUR 15.30
Buzzetti main stand extended black (1A quality) | Puch Maxi S, P1 | X30 NS, NL, NG
Manufacturer: Buzzetti · Material: Steel · Surface: powder-coated · Color: black · Stand base - center mount (A): 225 mm · Total width of stand base (B): 235 mm · Wide receptacle (C): 63 mm · Ø Receptacle (D): 18.5 mm · Spring nipple distance - center pivot axis (E): 100 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 50 mm · Total height: 240 mm · Puch OEM number: 321.2.24.001.2
EUR 75.40
ULO rear light NOS | Puch Maxi P1
Manufacturer: ULO · Test mark: E1 · Test mark: E4 · Material: Plastic · Color: orange · Color: red · Color: white · Bulb holder: BA9s · Width: 90 mm · Depth: 50 mm · Height: 85 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 60.90
Moped fans like you also bought:
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: SRE · Nominal diameter: 15 mm · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 77.00
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Color: silver · Surface: galvanized (blue) · Drive: External hexagon · Drive: Slot · Thread type: M8x1.25 (standard thread) · Screw head: Hexagon · Total length: 18 mm · Thread length: 12 mm · Puch OEM number: 901.1053
EUR 4.15
Spotlight round Ø 13 cm chrome
Test mark: none · Color: Chrome · Color: transparent · Housing material: Sheet metal (steel) · Surface: chrome-plated · Tension: 6 V · Tension: 12 V · Lens material: Plastic · Width: 135 mm · Height: 146 mm · Bulb holder: BA15d · Ø External connection: 12 mm · Depth: 80 mm · Speedometer recording: None · Thread size: M6 · Switch included: No · Battery operated: No · Area of application: Standard · Ø outside: 130 mm · Mounting type: Screws · Number of fixing points: 2 pcs
EUR 30.70
GPO sprocket 42 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 42 pcs · Number of fixing points: 6 pcs · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Ø inside: 94 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø mounting hole: 6.7 mm
EUR 23.60
Clamping screw with slotted chain guard black | Pony GTX, Cilo, KTM
Manufacturer: Pony · Material: Hard plastic · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: black · Color: silver · Thread type: Sheet metal screw · Drive: External hexagon · Drive: Slot · Ø External head: 19 mm · Total length: 29.5 mm · Thread length: 18 mm · Number of components: 1 pcs
EUR 2.85
GPO 12 mm intake manifold Puch X30 NG-2AH
Manufacturer: GPO · Camouflaged: No · Material: Aluminum · Ø inside: 12 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 32 - 38 mm · Number of fixing points: 2 pcs · Total height: 63 mm · Height flange center hole: 52.5 mm · Total length: 53 mm · Area of application: Original
EUR 47.40
swiing rear light (ULO)
Manufacturer: swiing · Material: Plastic · Test mark: none · Bulb holder: BA9s · Color: red · Mounting type: Nuts & bolts · Width: 65 mm · Height: 50 mm · Number of fixing points: 1 pcs · Brake light: No · Battery operated: No · Ø Receptacle: 4 mm · Reflectors: Yes · Depth: 60 mm
EUR 23.60
Collection only possible with online purchase and appointment.
