Black, adjustable shock absorbers with pink coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
| Surface | varnished |
| Color | pink, black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø outside | 50 mm |
| Ø spars | 30 mm |
| Ø Fastening inside | 10 mm |
| Hole spacing | 300 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.20
EUR 2’620.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Ø outside: 52 mm · Color: black · Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø spars: 32 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 330 mm · Ø Fastening inside: 10 mm
EUR 167.10
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Color: Chrome · Material: Aluminum · Damping type: Spring · Material: Steel · Adjustable: Yes · Surface: chrome-plated · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Ø outside: 46 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 300 mm
EUR 59.60
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Width: 105 mm · Height: 5.3 mm · Total length: 145 mm · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 13.00
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.50
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Width: 50 mm · Vacuum connection: No · Height: 95 mm · Nozzle block: 2.17 · Camouflaged: No · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 77.50
Not so nice 
15 mm intake manifold | Puch E50
Area of application: Tuning · Material: Aluminum · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Ø inside: 14.5 mm · Number of fixing points: 2 pcs · Total height: 54 mm · Height flange center hole: 43 mm · Total length: 47 mm · Camouflaged: Yes
EUR 14.20
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Surface: galvanized (blue) · Color: silver · Total length: 175 mm · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
EUR 11.80
Collection only possible with online purchase and appointment.
