Rear wheel hub for Puch spoked wheels.
Fits Puch Maxi and X30 Sport NG-2A spoked wheels.
With pressed-in ball bearings.
Reproduction product, which is not comparable in quality to the original Puch rims.
Attention: The sprocket should always be glued to the hub with Loctite, as the threaded mounts are sometimes a little tight in diameter.
In addition, only Esjot freewheels should be used.
Good quality reproduction product from the Asian market.
| Manufacturer | Quenching |
| Color | gray |
| Puch |
Accessories & related products
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Manufacturer: swiing® revival parts · Thread length: 26 mm · Thread length: 52.5 mm · Ø shaft: 11.9 mm · Material: Steel · Surface: galvanized (blue) · Total length: 185 mm · Ø outside: 11.8 mm · Shank length: 100 mm
EUR 17.80
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.10
EUR 2’610.00/l
ESJOT freewheel 16 - 23 teeth (1A quality)
Chain pitch: 1/2" x 1/8" · Thickness: 15 mm · Thread type: FG34.8 (1.37" 24G) · Manufacturer: ESJOT · Material: Steel · Surface: Hardened · Color: silver · Number of teeth: 16 pcs · Number of teeth: 18 pcs · Number of teeth: 20 pcs · Number of teeth: 23 pcs
EUR 17.80
Moped fans also bought
GPO license plate holder Inox (CH version)
Thread type: M5x0.8 (standard thread) · Manufacturer: GPO · Thread length: 8 mm · Material: Chrome steel (known as Nirosta®) · Color: silver · Mounting type: Nuts & bolts · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
EUR 13.00
Spotlight round Ø 13 cm chrome / black
Depth: 80 mm · Material: Sheet metal (steel) · Test mark: none · Bulb holder: BA15d · Color: Chrome · Housing material: Metal · Color: black · Surface: chrome-plated · Color: transparent · Surface: varnished · Lens material: Plastic · Mounting type: Screws · Width: 134 mm · Ø outside: 130 mm · Height: 147 mm · Speedometer recording: None · Thread size: M6 · Switch included: No · Battery operated: No · Number of fixing points: 2 pcs · Area of application: Standard
EUR 29.70
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Color: Chrome · Surface: chrome-plated · Mounting type: Fork plate · Clamping diameter: 22 mm · Fork plate holder length: 100 mm · Width: 730 mm · Ø outside: 22 mm · Height: 400 mm · Length handlebar ends: 150 mm · Crossbar: Yes · Ø inside (C): 14 mm · Total length over ends: 320 mm
EUR 42.80
Rim ring 1.20 x 17" (47 mm) chrome
Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Rim well depth: 6 mm · Nominal diameter: 433 mm · Overall width outside: 47 mm · Ø Nipple hole: 5.5 mm · Jaw width: 31 mm · Jaw width [inch]: 1.2 " · Number of spoke holes: 36 pcs
EUR 47.50
Not in stock
Collection only possible with online purchase and appointment.
