High-end CNC aluminum transmission cooler for your moped / moped with Puch E50 engine.
Thanks to improved cooling, the clutch works more stress-free. However, this technical miracle also lowers the temperature at the cylinder head.
All components from your original engine can be used, only the cooling fin is fitted in between. Due to the different threads, you have a variety of connection options, such as a temperature sensor.
The following components are included in the scope of delivery:
1x cooling fin, black anodized aluminium
2x seal
1x aluminium bushing
3x O-ring seal
1x hose nozzle
1x circlip / retaining ring
4x countersunk screws hexagon socket M6 x 55 (fastening of cooler / coupling cover)
| Material | Aluminum |
| Surface | anodized |
| Ø inside | 107 mm |
| Color | black-matt |
| Ø outside | 150 mm |
| Width | 32 mm |
| Puch | E50 |
Accessories & related products
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.80
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Ø outside: 130 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs · Total length: 170 mm · Width: 150 mm · Height: 80 mm
EUR 178.60
swiing® revival stud bolt set M6 x 106 mm | Puch
Drive: External hexagon · Diameter: 5.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 106 mm · Width across flats SW: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
PVL ignition coil analog 105458 / 458115
Manufacturer: PVL · Place of use: External (outside the ignition) · Color: black · Number of fixing points: 2 pcs · Mounting type: Screws · Ø mounting hole: 6 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 117.80
PVL stator "1443" ignition
Manufacturer: PVL · Material: Aluminum · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: black · Number of cables: 2 pcs · Number of fixing points: 3 pcs
EUR 117.80
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 11.80
Polini air filter Big Evo Ø 28/35/42/45/49/55 mm oval / straight
Manufacturer: Polini · Camouflaged: No · Total length: 140 mm · Material: Foam · Material: Rubber · Filter type: Foam · Color: black · Color: blue · Length rubber part: 13 mm · Width: 150 mm · Area of application: Tuning · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Height: 100 mm · Mounting type: Plug connection clamped · Mounting type: Screwed clamp
EUR 71.40
Collection only possible with online purchase and appointment.
