Polini CP 21 carburetor for your racing moped, moped and small motorcycle. The racing carburetor developed by Polini has a compact design and is around 40 % lighter than comparable carburetors. The air flow is optimized thanks to the short intake path and the circular passage. The larger needle and an adapted mixing tube support the atomization of the gas mixture. This makes it very easy to tune the carburetor. In addition, consumption is reduced even at high power levels.
Fastening to the intake manifold is by means of a rubber sleeve.
Installed main throttle body: 100
Installed secondary throttle body: 40
Ø Nominal: 21 mm
Ø Air filter connection: 46 mm
Ø Intake manifold connection: 25 mm
Alternative racing carburetors, the sleeve for installation and the matching nozzles can be found in the accessories section.
Quality product from the Italian manufacturer Polini.
| Total length | 71 mm |
| Manufacturer | Polini |
| Camouflaged | No |
| Area of application | Tuning, Racing, Performance |
| Component group Carburetor | Carburetor complete |
| Material | Aluminum |
| Carburetor type | CP |
| Nominal diameter | 21 mm |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 100 |
| Ø Inside entrance | 42 mm |
| Ø Output inside | 22.5 mm |
| Ø Air filter connection | 47 mm |
| Ø fuel hose connection | 6 mm, 7 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle block | 35-12 |
| Size of secondary nozzle | 40 |
| Mounting type | Rubber sleeve |
| Width | 66 mm |
| Height | 132 mm |
Accessories & related products
Polini jet set (100 - 118) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Carburetor type: CP · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Nozzle size: 112 · Nozzle size: 114 · Nozzle size: 116 · Nozzle size: 118
EUR 47.60
Polini CP 17.5 mm carburetor (hand choke)
Nominal diameter: 17.5 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: CP · Mounting type: Plug connection clamped · Choke control: Hand choke · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 62 · Area of application: Tuning · Size of secondary nozzle: 40
EUR 166.70
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
EUR 47.60
Polini 26 mm carburetor (hand choke)
Material: Aluminum · Nominal diameter: 26 mm · Total length: 83 mm · Width: 65 mm · Height: 155 mm · Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 105 · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Size of secondary nozzle: 45
EUR 172.70
Polini CP 19 mm carburetor (hand choke) rubber flange
Nominal diameter: 19 mm · Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: CP · Mounting type: Rubber sleeve · Choke control: Hand choke · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 71 mm · Ø Inside entrance: 42 mm · Ø Output inside: 21.8 mm · Ø Air filter connection: 47 mm · Width: 66 mm · Height: 132 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 90 · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Size of secondary nozzle: 40
EUR 154.80
EUR 178.60
Polini CP 23 mm carburetor (cable choke) rubber flange
Material: Aluminum · Nominal diameter: 23 mm · Total length: 71 mm · Width: 66 mm · Height: 132 mm · Manufacturer: Polini · Mounting type: Rubber sleeve · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: CP · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 110 · Ø Inside entrance: 42 mm · Ø Output inside: 25 mm · Ø Air filter connection: 47 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle block: 35-12 · Size of secondary nozzle: 40
EUR 166.70
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Total length: 28 mm · Material: Spring steel · Surface: coated · Color: blue · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Area of application: Tuning
EUR 21.30
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Area of application: Standard
EUR 3.35
PVL ignition coil analog 105458 / 458115
Place of use: External (outside the ignition) · Manufacturer: PVL · Mounting type: Screws · Number of fixing points: 2 pcs · Color: black · Ø mounting hole: 6 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 117.90
PVL stator "1443" ignition
Manufacturer: PVL · Number of fixing points: 3 pcs · Material: Aluminum · Color: black · Number of cables: 2 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 117.90
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Material: Aluminum · Surface: sandblasted · Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Number of fixing points: 4 pcs · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Area of application: Tuning · Ø Inlet inside: 18.3 mm · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 250.20
PVL internal rotor ignition left-, right-turning
Manufacturer: PVL · Mounting type: Screws · Material: Aluminum · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 297.80
Collection only possible with online purchase and appointment.
