Special exhaust for various Puch mopeds / mopeds which are equipped with a racing cylinder. The racing silencer fits cylinders with a narrow outlet.
This racing exhaust impresses with its solid construction and high-quality workmanship. The silencer is lined with stainless sheet steel (chrome steel).
Ideally, the tuning muffler should be used in conjunction with cylinder kits from 46 mm to exploit the full power.
Due to the huge resonance body, this racing muffler gives your moped a brute increase in power in the middle and upper speed range.
Mounting aids and other add-on parts can be found in the accessories section.
Handmade quality product from the manufacturer MLM.
| Manufacturer | MLM |
| Material | Steel |
| Exhaust type | Cone / double cone |
| Number of fixing points | 1 pcs |
| Color | black |
| Mounting type | Welded lug |
| Flame tube attachment | Flange |
| Puch | E50 |
Ratings
Accessories & related products
Metrakit 47 mm cylinder kit 75 ccm
Nominal diameter: 47 mm · Manufacturer: Metracite · Material: Gray cast iron · Surface: varnished · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 395.10
Not in stock
Airsal 47 mm cylinder kit angled exhaust | Puch
Nominal diameter: 47 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 197.50
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Area of application: Tuning · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Number of fixing points: 4 pcs · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No
EUR 244.00
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Material: Graphite / Graphite · Area of application: Tuning · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Thickness: 3 mm · Hole spacing outlet: 42.5 mm
EUR 8.60
Explore categories from Exhaust system
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.50
EUR 10.40
EUR 23.11/l
Simonini carbon exhaust | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø Silencer: 60 mm · Ø Internal connection: 24 mm · Ø outside: 90 mm · Mounting type: Welded lug · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Total length: 875 mm · Flame tube attachment: Flange · Number of fixing points: 1 pcs
EUR 255.60
Cable set cut with adjusting screws | Puch Maxi
Manufacturer: Made in Germany · Material: Brass · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1120 mm · Outer shell length: 1150 mm · Outer shell length: 1740 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1200 mm · Total length: 1250 mm · Total length: 1450 mm · Total length: 1830 mm
EUR 40.60
DMP intake rubber Ø 33.5 / 33.5 x 31.5 with clamps
Manufacturer: DMP · Material: Rubber · Overall length (A): 31.3 mm · Color: black · Ø Passage (B): 30.7 mm · Ø inside (C): 33.5 mm · Ø inside 2 (D): 33.5 mm · Ø outside (E): 46.5 mm · Ø outside 2 (F): 46.5 mm · Ø External connection (G): 46.5 mm · Ø External connection 2 (H): 46.5 mm · Ø Clamping (I): 32.5 mm · Ø Clamping 2 (K): 32.5 mm
EUR 15.00
Rear fender blank | Puch Maxi S, Supermaxi LG1 / LG2
Material: Steel · Surface: blank / oiled · Color: silver · Folding the ends: not folded · Folding the ends: open folded · Shape of the mudguard: angular · Total length over ends: 420 mm · Scope: 480 mm · Wide mudguard profile: 73 mm · Wide mudguard profile: 75 mm · Height of mudguard profile: 30 mm · Height of mudguard profile: 60 mm · Mounting type: Weld · Total height from support surface to top edge: 110 mm · Wheel size: 17 "
EUR 34.80
Collection only possible with online purchase and appointment.
