Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi N chopper as well as X30 chopper moped / moped with 14" rim.
The brake anchor plate was manufactured in a small series with the old casting tools and therefore corresponds to the original from the past.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with grooved ball bearings and an M11 axle.
The 28 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing these with a high-quality alternative such as those in the accessories section.
| Ø inside | 80 mm |
| Manufacturer | LELEU |
| Ø outside | 115 mm |
| Material | Aluminum |
| Ø drum | 80 mm |
| Area of application | Original |
| Axle length | 160 mm |
| Ø axle | 11 mm |
| Ø bolt circle | 105 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Number of spoke holes | 28 pcs |
| Ø spoke hole | 3.7 mm |
| Puch |
Ratings
Accessories & related products
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Ø outside: 10 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Width across flats: 8 mm · Total length: 41.1 - 65 mm · Number of components: 3 pcs · Thread length: 30 mm · Area of application: Special tool
EUR 19.90
Hot 
LELEU wheel hub spoke wheel front 36 holes with anchor plate & axle | Puch
Manufacturer: LELEU · Material: Aluminum · Axle length: 160 mm · Thread type: MF11x1 (fine pitch thread) · Ø outside: 115 mm · Ø axle: 11 mm · Ø drum: 80 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Area of application: Original
EUR 192.60
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Material: Aluminum · Ø drum: 80 mm · Color: silver · Ø axle: 12 mm · Ø bolt circle: 105.5 mm · Ø outside: 115 mm · Total length: 185 mm · Number of fixing points: 6 pcs · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Area of application: Standard · Width: 105 mm · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Puch OEM number: 349.5.41.803.1
EUR 114.30
Not in stock
Moped fans also bought
Side stand chrome | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Surface: powder-coated · Color: Chrome · Color: black · Adjustable: Yes · Length pivot point - floor: 220 mm · Total length: 345 mm · Mounting type: Screwed clamp · Number of fixing points: 2 pcs
EUR 23.50
GPO 19" spoke set incl. nipple (2.9 x 212 mm) Inox
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Quantity: 36 pcs · Surface: raw · Length from hook: 212 mm · Nominal diameter (thread): 3.15 mm · Color: silver · Ø spoke: 2.9 mm · Ø spoke head: 5.35 mm · Nipple length: 14 mm · Ø nipple head: 8.1 mm · Ø Nipple neck: 5 mm · Hook length: 9.8 mm · Thread length: 11 mm · Hook angle: 95 °
EUR 72.20
swiing® revival swabs short Bing SRE, SSN, SSE, SRF, 85, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Total length: 25 mm · Ø inside: 2.5 mm · Ø outside: 8 mm · Pony OEM number: A2430 · Sachs OEM no.: 0281 109 000
EUR 4.70
Speedo drive 19" right | Puch Velux
Ø mounting hole: 10 mm · Color: gray · Manufacturer: Made in Germany · Ø outside: 41 mm · Material: Aluminum · Place of use: right · Thread type: MF10x1 (fine pitch thread) · 4-edge speedometer cable: 2.6 mm · Overall width outside: 50 mm · Ø axle: 10 mm · Wheel size: 19 " · Total height: 48 mm
EUR 54.10
Collection only possible with online purchase and appointment.
