Connecting rubber / rubber flange 19/19x47 mm for connecting your carburetor to various mopeds, mopeds and small motorcycles.
This rubber connector was installed ex works on Zündapp vehicles, among others, but is also suitable for various other models and brands.
Further adapter flanges or intake rubbers in other sizes as well as matching pipe clamps can be found in the accessories section.
A quality product manufactured in Germany.
Original Zündapp spare part number: 267-04.139
| Manufacturer | Made in Germany |
| Material | Rubber |
| Ø inside | 19 mm |
| Ø outside | 29.5 mm |
| Ø Bundle | 24.4 mm |
| Total length | 46.6 mm |
| Color | black |
| Ø inside 2 | 19 mm |
| Waistband height | 10.3 mm |
| Ø Passage | 16.7 mm |
| Zündapp OEM number | 267-04.139 |
| Universal |
| Zündapp |
Ratings
Accessories & related products
swiing® ingenious 15 mm carburetor set (Bing SRE) | Zündapp Belmondo
Manufacturer: GPO · Manufacturer: swiing® revival parts · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Nominal diameter: 16 mm · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 40 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Area of application: Tuning · Ø Internal connection: 20 mm · Choke control: Hand choke · Clamping screw torque (max.): 4 N/m
EUR 139.40
Intake rubber | Zündapp CS, CX
Manufacturer: Made in Germany · Material: Rubber · Ø inside 2: 19 mm · Ø External connection: 34 mm · Ø Connection 2 external: 26 mm · Ø inside: 28 mm · Ø outside: 43 mm · Total length: 72 mm · Material thickness: 3 mm · Color: black · Zündapp OEM number: 278-04.112
EUR 17.30
Explore categories from Silent blocks & rubber parts
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Total length: 55 mm · Total length: 75 mm · Material: Steel · Surface: blackened · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 11.50
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Thickness: 4.5 mm · Ø inside: 94 mm · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Number of teeth: 45 pcs · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Hole spacing: 36.5 mm · Color: black · Ø bolt circle: 105.5 mm
EUR 23.10
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Width: 123 mm · Width: 230 mm · Width: 330 mm · Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank) · Height: 26 mm · Height: 60 mm · Height: 65 mm
EUR 10.90
AKOA intake manifold 19 mm PHBG angular | Puch X30 NS, NL Z50, E50
Manufacturer: AKOA · Camouflaged: No · Material: Aluminum · Ø inside: 19 mm · Ø External connection: 24 mm · Mounting type: Nuts · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 68 mm · Height flange center hole: 57 mm · Area of application: Tuning
EUR 81.30
Collection only possible with online purchase and appointment.
