profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
hs-retro-400px

For: Puch

32376

HS-Retro countershaft 11 / 17 teeth (1A quality) | Puch X30 NS, NL

rating iconrating iconrating iconrating iconrating icon
No reviews
EUR 199.70

Incl. 22% VAT.

Description

Timing shaft for 2-speed manual Z50 engines from Puch X30 NS, NL mopeds / mopeds.

Number of teeth 1st gear: 11
Number of teeth 2nd gear: 17
Toothing: straight

You can find thrust washers and other parts for the shaft in the accessories section.

Original Puch spare part number: 349.1.13.201.1

ManufacturerHS-Retro
MaterialSteel
Number of teeth11 pcs, 17 pcs
Toothing typestraight toothed
Total length99 mm
Thread typeMF10x1 (fine pitch thread)
Puch OEM number349.1.13.201.1
Puch

Z50 (X30 Sport)

Accessories & related products

Cylindrical roller Ø 3.5 x 7.5 Gearbox | Puch Z50
undefined

For: Puch

11498

Cylindrical roller Ø 3.5 x 7.5 Gearbox | Puch Z50

Diameter: 3.5 mm · Width: 7.4 mm · Manufacturer: Puch · Area of application: Standard · Material: Steel · Surface: Hardened

EUR 1.75

Nos
Thrust washer 12.5/25/1.5 NOS | Puch M50, DSV, VZV

For: Puch

27867

Thrust washer 12.5/25/1.5 NOS | Puch M50, DSV, VZV

Thickness: 1.5 mm · Material: Steel · Surface: hardened & ground · Ø inside: 12.5 mm · Ø outside: 25 mm · Puch OEM number: 329.1.13.006.1

EUR 11.70

swiing® revival thrust washer 12.5/18/2.2 gearbox | Puch Z50
undefined

For: Puch

28148

swiing® revival thrust washer 12.5/18/2.2 gearbox | Puch Z50

Thickness: 2.25 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 12.5 mm · Ø outside: 18 mm

EUR 9.10

Nos
Thrust washer 12.5/18/2.75 Gearbox NOS | Puch Z50
undefined

For: Puch

28149

Thrust washer 12.5/18/2.75 Gearbox NOS | Puch Z50

Thickness: 2.75 mm · Manufacturer: Puch · Material: Steel · Surface: hardened & ground · Ø inside: 12.5 mm · Ø outside: 18 mm

EUR 9.10

swiing® revival thrust washer 12.5/18/1.6 gearbox | Puch Z50
undefined

For: Puch

30383

swiing® revival thrust washer 12.5/18/1.6 gearbox | Puch Z50

Thickness: 1.6 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 12.5 mm · Ø outside: 18 mm · Area of application: Standard

EUR 9.10

swiing® revival thrust washer 12.5/18/1.8 gearbox | Puch Z50
undefined

For: Puch

30384

swiing® revival thrust washer 12.5/18/1.8 gearbox | Puch Z50

Thickness: 1.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 12.5 mm · Ø outside: 18 mm · Area of application: Standard

EUR 9.10

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32368

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Width: 8 mm · Recording type: Cross shot · Ø inside: 13.35 mm · Ø outside: 43 mm · Puch OEM number: 050.1.1410

EUR 87.90

HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32371

HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Width: 7.55 mm · Ø inside: 23.8 mm · Ø outside: 31.98 mm · Area of application: High End · Area of application: Original · Puch OEM number: 329.1.13.065.1

EUR 70.50

HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32372

HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Surface: hardened & ground · Width: 7.5 mm · Ø inside: 19.44 mm · Ø outside: 28.1 mm · Puch OEM number: 329.1.13.010.1

EUR 53.70

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32373

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Number of teeth: 28 pcs · Toothing type: straight toothed · Ø axle: 12.4 mm · Ø inside: 12.4 mm · Ø outside: 54 mm · Puch OEM number: 350.1.13.011.1

EUR 127.90

HS-Retro gearwheel 2nd gear 23 teeth (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32374

HS-Retro gearwheel 2nd gear 23 teeth (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Number of teeth: 23 pcs · Toothing type: straight toothed · Ø axle: 17.2 mm · Ø inside: 17.2 mm · Ø outside: 45 mm · Puch OEM number: 350.1.13. 112.1

EUR 135.10

HS-Retro pinion shaft | Puch X30 NS, NL (1A quality)
undefined

For: Puch

32375

HS-Retro pinion shaft | Puch X30 NS, NL (1A quality)

Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Recording type: Interlocking · Total length: 90.5 mm · Ø outside: 12.35 mm · Ø outside: 16.75 mm · Puch OEM number: 350.2.13.020.1

EUR 182.90

Explore categories from Gearbox & housing (motor)

S-10-30-020-010_Anlauf-Passscheiben
Thrust & shim washers
S-10-30-020-020_Getriebe_Wellen
Gearboxes & shafts
S-10-30-020-030_Schaltmechanismus
Switching mechanism
S-10-30-020-040_Gehaeuseschalen
Housing shells
S-10-30-020-050_Kick_Pedal_Elektrostart
Kick- pedal- & electric start
S-10-30-020-060_Motoraufhaengung
Motor suspension
Flat gasket
Simmerrings
Seals & O-rings
Dichtsatz
Revisionsset

Moped fans also bought

GPO clutch plates (pair) | Puch X30
undefined

For: Puch

10017

GPO clutch plates (pair) | Puch X30

Manufacturer: GPO · Number of slats: 2 pcs · Area of application: Standard

EUR 17.80

GPO sprocket 13 teeth (wide) | Puch
undefined

For: Puch

10103

GPO sprocket 13 teeth (wide) | Puch

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: Hardened · Recording type: Interlocking · Number of teeth: 13 pcs · Ø inside: 13.7 mm · Ø inside: 16.9 mm · Total thickness: 4.6 mm

EUR 9.45

GPO sprocket 15 teeth (wide) | Puch
undefined

For: Puch

10119

GPO sprocket 15 teeth (wide) | Puch

Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: Hardened · Number of teeth: 15 pcs · Recording type: Interlocking · Total thickness: 4.6 mm · Ø inside: 13.7 mm · Ø inside: 16.9 mm

EUR 9.45

swiing® revival gasket set Z50 engine | Puch X30 NS / NL
undefined

For: Puch

10157

swiing® revival gasket set Z50 engine | Puch X30 NS / NL

Manufacturer: swiing® revival parts · Number of components: 10 pcs · Material: Sealing paper · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Area of application: Standard

EUR 23.80

Nut flywheel M10x1 SW15 serrated

For: Puch · Sachs · Zündapp Belmondo · Tomos · Hercules · Kreidler · Zündapp

10219

Nut flywheel M10x1 SW15 serrated

Ø outside: 19.8 mm · Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Drive: External hexagon · Nominal diameter (thread): 10 mm · Height: 10.5 mm · Thread type: MF10x1 (fine pitch thread) · Width across flats: 15 mm · Area of application: Standard

EUR 3.45

Hot Hot
Motorex Automatic Motor Oil (ATF) 450 ml
undefined

For: Universal · Puch · Sachs · Tomos · Bye Bike

10366

Motorex Automatic Motor Oil (ATF) 450 ml

Manufacturer: Motorex · Contents: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002

EUR 13.00

EUR 28.89/l

Clutch pressure plate | Puch E50 Cat. (LG1)

For: Puch

10378

Clutch pressure plate | Puch E50 Cat. (LG1)

Ø outside: 100 mm · Material: Steel · Thickness: 2 mm

EUR 22.60

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Cable length: 1650 mm · Nipple shape: Ball · Area of application: Standard

EUR 2.85

swiing® revival stud bolt set M6 x 106 | Puch
undefined

For: Puch

10842

swiing® revival stud bolt set M6 x 106 | Puch

Total length: 106 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1

EUR 8.85

HS-Retro gearwheel 2nd gear 23 teeth (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32374

HS-Retro gearwheel 2nd gear 23 teeth (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Material: Steel · Number of teeth: 23 pcs · Toothing type: straight toothed · Ø axle: 17.2 mm · Ø inside: 17.2 mm · Ø outside: 45 mm · Puch OEM number: 350.1.13. 112.1

EUR 135.10