For the economical repair of damaged or worn threads (of all materials) and as a design element for thread reinforcement when using materials with low shear strength (e.g. aluminum, aluminum-magnesium alloys). The use of wear-free HeliCoil thread inserts not only repairs the thread but also increases the thread load-bearing capacity.
Execution:
High-strength, free-running HeliCoil®plus thread inserts made of stainless steel with high wear resistance, low thread friction in tight tolerances, high surface strength as well as corrosion resistance and heat resistance. The flexible design enables even load and stress distribution and thus produces durable screw connections of the highest quality for all operating loads (static, dynamic) with ideal force transmission. Uncomplicated, quick assembly, creating an internal thread that is true to gauge and can be used on both sides.
Complete repair kit for M10x1 thread sizes in a plastic case.
Application:
1. Drill out the defective thread with the enclosed drill.
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special HeliCoil tap.
4. Turn the thread insert into the holding thread using the installation tool.
5. Remove the tang with the tang breaker
Scope of delivery
- 1 pc. twist drill Ø10.2 mm
- 1 pc. Tap
- 1 pc. Installation tool
- 1 pc. Stud breaker
- 10 pcs. HeliCoil thread insert (1×D)
- 10 pcs. HeliCoil threaded insert (1.5×D)
- 10 pcs. HeliCoil threaded insert (2×D)
- 1 pc. Plastic case 180×165×45 mm (L×B×H)
Note
Adetailed instruction is included.
Original HeliCoil product from the German manufacturer Böllhoff.
| Total length | 10 mm, 15 mm, 20 mm |
| Manufacturer | HeliCoil |
| Material | Chrome steel (known as Nirosta®) |
| Thread type | MF10x1 (fine pitch thread) |
| Number of components | 30 pcs |
| Nominal diameter (thread) | 10 mm |
| Dimension thread insert | 1D, 1.5D, 2D |
| Ø bore | 10.2 mm |
| Storage method | Suitcase |
| Dimension storage box | 180 x 165 x 45 mm |
| Area of application | Workshop accessories |
Accessories & related products
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Total length: 28 mm · Material: Spring steel · Surface: coated · Color: blue · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Area of application: Tuning
EUR 21.30
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 11.80
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Thread type: MF14x1.25 (fine pitch thread) · Number of components: 1 pcs · Diameter: 12 mm · Diameter: 16 mm · Width across flats SW: 17 mm · Total length: 83 mm · Area of application: Special tool
EUR 11.30
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Total length: 290 mm · Height: 80 mm · Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 93 mm · Number of components: 1 pcs · Ø inside: 27 mm · Area of application: Special tool · Diameter: 19 mm · Ø Pin: 8 mm
EUR 57.10
MBR clutch basket 18 teeth Racing straight | Puch E50
Material: Steel · Height: 49 mm · Manufacturer: MBR · Ø outside: 99.5 mm · Number of teeth: 18 pcs · Toothing type: straight toothed · Ø inside: 15 mm · Ø inside: 17 mm · Recording type: Interlocking · Area of application: Tuning · Ø Receptacle: 31 mm
EUR 220.40
Collection only possible with online purchase and appointment.
