profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
logo_helicoil

Universal

17006

HeliCoil thread repair case M5 - M12 (professional tool)

EUR 412.60

Incl. 22% VAT.

Description

The use of wear-free HeliCoil thread inserts not only repairs the thread but also increases the thread load-bearing capacity.

Application:
1. Drill out the defective thread with the enclosed drill
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special HeliCoil tap.
4. Turn the thread insert into the holding thread.
5. Remove the tang with the tang breaker.

Full instructions are included.
For thread sizes M5, M6, M8, M10 and M12.

Scope of delivery for each thread size:
1 spiral drill
1 tap. Thread tap
1 pc. Installation tool
1 pc. Tang breaker
20 or 10 pcs. HeliCoil thread insert (1d)
20 or 10 pcs. HeliCoil thread insert (1.5d)
20 or 10 pcs. HeliCoil threaded insert (2d)

Original HeliCoil product from the German manufacturer Böllhoff.

Storage methodSuitcase
Storage box dimension [mm]420 x 345 x 120 mm
ManufacturerHeliCoil
MaterialChrome steel (colloquially known as stainless steel)
Area of applicationWorkshop accessories
Number of components300 pcs
Dimension thread insert1D, 1.5D, 2D
Nominal diameter (thread)5 mm, 6 mm, 8 mm, 10 mm, 12 mm
Thread typeM5x0.8 (standard thread), M6x1 (standard thread), M8x1.25 (standard thread), M10x1.5 (standard thread), M12x1.75 (standard thread)

Accessories & related products

Adjustable tap wrench 180 mm M1 - M10 (No. 1)
undefined

Universal

24287

Adjustable tap wrench 180 mm M1 - M10 (No. 1)

Manufacturer: Made in Europe · Area of application: Workshop accessories · Total length: 180 mm

EUR 28.60

Normio Holder Tap Ratchet M1 - M10
undefined

Universal

24290

Normio Holder Tap Ratchet M1 - M10

Manufacturer: Normio · Area of application: Workshop accessories

EUR 33.40

Explore categories from Screws & fastener sets

S-20-60-070-010_Schraubensets
Screw sets
S-20-60-070-020_Abdeckkappen
Cover caps
S-20-60-070-030_Gewindestifte-Stehbolzen
Grub screws & stud bolts
S-20-60-070-040_Helicoil-Gewindeeinsatz
Helicoil & threaded inserts
S-20-60-070-050_Muttern-Hutmuttern
Nuts & cap nuts
S-20-60-070-060_Scheiben
Slices
S-20-60-070-070_SchlitzKreuzschlitzschrauben
Slotted & Phillips screws
S-20-60-070-080_Sechskantschrauben
Hexagon & hexagon socket screws
S-20-60-070-090_Sicherungselemente
Safety elements
S-20-60-070-100_Stifte-Keile-Nieten
Pins, wedges & rivets

Moped fans also bought

Magura cable clamp Ø 8 x 15 mm
undefined

For: Universal · Puch · Sachs

10057

Magura cable clamp Ø 8 x 15 mm

Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 8 mm · Width across flats: 7 mm · Thread type: M6x1 (standard thread) · Ø Bundle: 6 mm · Total length: 15 mm · Thread length: 7 mm

EUR 3.00

Hot Hot
GPO sprocket 13 teeth (wide) | Puch
undefined

For: Puch

10103

GPO sprocket 13 teeth (wide) | Puch

Manufacturer: GPO · Material: Steel · Surface: Hardened · Ø inside: 13.7 mm · Ø inside: 16.9 mm · Chain type: 415H · Recording type: Interlocking · Chain pitch: 1/2" x 3/16" · Number of teeth: 13 pcs · Total thickness: 4.5 mm

EUR 9.45

Outlet seal Ø 27 Steel ring

For: Puch

10113

Outlet seal Ø 27 Steel ring

Material: Sealing carton · Material: Sheet metal (steel) · Reinforced: Yes · Thickness: 2.1 mm · Ø outlet inside: 27 mm · Area of application: Tuning · Place of use: Outlet · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.3 mm

EUR 3.45

Hot Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Solex · Tomos

10126

swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)

Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.95 mm · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9

EUR 2.15

Hot Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Tomos

10174

Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)

Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Area of application: Standard · Nipple length: 10 mm

EUR 2.85

Bearing puller set 3 pcs.

Universal

11787

Bearing puller set 3 pcs.

Width across flats trigger: 13 mm · Width across flats trigger: 15 mm · Width across flats trigger: 17 mm · Material: Steel · Area of application: (Dis)assembly tool · Number of components: 3 pcs

EUR 47.70

Normio Retaining Ring, 18 mm Pedal Axle | Sachs 50/2 Caravelle
undefined

For: Universal · Sachs

23469

Normio Retaining Ring, 18 mm Pedal Axle | Sachs 50/2 Caravelle

Fuse type: Outside · Manufacturer: Normio · Material: Spring steel · Nominal diameter: 18 mm

EUR 2.30

swiing® revival plain bearing 18/20/20 pedal axle | Sachs 50/2 Caravelle
undefined

For: Sachs

23470

swiing® revival plain bearing 18/20/20 pedal axle | Sachs 50/2 Caravelle

Ø inside: 18 mm · Nominal diameter inside: 18 mm · Ø outside: 20 mm · Manufacturer: swiing® revival parts · Material: Brass · Total height: 20 mm

EUR 13.00