Grip covers with finely textured leather look in red-brown color for your moped, moped and small motorcycle with automatic transmission.
This grip set includes one grip cover each with 22 and 24 mm inner diameter.
Ø inside: 22 / 24 mm
Total length: 130 mm
Material grip ends: Aluminum
For manual mopeds with 24 mm inner diameter on both grips, two grip sets must be ordered.
To make installation easier, we recommend heating the grip rubber slightly or spraying the inside with GPO Grip Spray.
Further grip sets and the aforementioned spray can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Imitation leather, Aluminum |
| Color | brown, red |
| Total length | 130 mm |
| Ø inside | 22 mm, 24 mm |
Ratings
Accessories & related products
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Width across flats: 7 mm · Drive: External hexagon · Drive: Slot · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Thread length: 7 mm · Area of application: Standard
EUR 3.00
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard
EUR 2.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Drive: Slot · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.40
Wheel axle set M12x1 x 165 front
Material: Steel · Total length: 165 mm · Height: 9.9 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Manufacturer: Quenching · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Surface: burnished · Surface: galvanized (blue) · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Thread length: 25 mm · Thread length: 26 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Ø shaft: 11.9 mm · Shank length: 114 mm
EUR 17.70
Hot
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Ø mounting hole: 6 mm · Material: Aluminum · Material: Plastic · Tension: 6 V · Performance: 50 W · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws
EUR 36.00
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2250 mm · Area of application: Standard · Piaggio OEM number: 270460
EUR 2.90
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Thickness: 0.35 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Color: sand-colored · Total length: 200 mm · Width: 130 mm · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
EUR 6.50
Collection only possible with online purchase and appointment.
