Original reproduction air filter for your Puch Maxi S / N moped / moped with standard Bing or swiing® SRE carburetor.
The complete air filter box is supplied pre-assembled. As usual from the factory, it has already been carefully sealed by hand with a silicone joint around the seam to minimize the risk of air leakage and make it easier to adjust the carburettor.
The complete air filter set includes the two housings, the mounting brackets, the air filter hose, the two air filter plugs and the original filter screen installed in the air filter.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Puch spare part number: 349.1.15.070.0, 349.3.15.070.0, 349.6.15.070.0
| Manufacturer | GPO |
| Color | black |
| Filter type | Standard sieve |
| Ø Internal connection | 20 mm |
| Area of application | Original, Standard |
| Mounting type | Plug connection clamped |
| Puch | E50 |
Accessories & related products
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Temperature resistance (min.): -60 - 315 °C · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Color: black · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 23.80
EUR 340.00/l
swiing® ingenious 17 mm carburetor set camouflaged | Puch E50
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Mounting type: Plug connection clamped · Ø Air filter connection: 27.5 mm · Hole spacing inlet: 38 mm · Mixed oil connection: No · Choke control: Hand choke · Nozzle block: 2.2 · Camouflaged: Yes · Area of application: Racing · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 215.20
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Material: Aluminum · Manufacturer: GPO · Surface: sandblasted · Ø cylinder: 38 mm · Candle thread: short · Height: 55 mm · Total length: 135 mm · Width: 125 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Area of application: Standard
EUR 39.40
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 58 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Total length: 920 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Flame tube attachment: Flange · Number of fixing points: 4 pcs
EUR 77.60
Hot
swiing® revival 12 mm carburetor "original" | Puch
Material: Aluminum · Manufacturer: swiing® revival parts · Nominal diameter: 12 mm · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Color: gray · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Height: 108 mm · Ø fuel hose connection: 6 mm · Total length: 65 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Width: 50 mm · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.15 · Camouflaged: No · Area of application: Standard · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 83.60
swiing® revival 12 mm intake manifold | Puch E50
Material: Aluminum · Manufacturer: swiing® revival parts · Total length: 45.5 mm · Ø inside: 12 mm · Hole spacing inlet: 38 mm · Total height: 53 mm · Height flange center hole: 43 mm · Mounting type: Screws · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Camouflaged: No · Area of application: Original
EUR 41.80
Hot
swiing® revival 38 mm cylinder kit 1.6 hp CH12 "original" | Puch
Material: Aluminum · Surface: sandblasted · Manufacturer: swiing® revival parts · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 19 mm · Ø Inlet inside: 9 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Standard · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 155.40
Hot
swiing® revival nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Total length: 6 mm · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
EUR 26.20
Not in stock
swiing® revival 50 ccm 1.6 hp cylinder set "original" | Puch E50
Manufacturer: GPO · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Nominal diameter: 38 mm · Number of fixing points: 4 pcs · Outlet type: straight · Decompressor: No
EUR 418.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
