Fancy saddle with red imitation leather for universal use on your moped, moped and small motorcycle.
The seatbelt can be mounted on all seat tubes with an outer diameter of 22 mm and impresses with its good workmanship.
Length: approx. 470 mm
Width: approx. 240 mm
Height: approx. 200 mm
Fastening bolts at the rear: 2x M8 x 12
Fastening bolt spacing: 100 mm
The seat clamp is already mounted and included in the scope of delivery.
The support plate for mounting on the luggage carrier is not included in the scope of delivery and must be manufactured by yourself depending on the model and brand.
Other seat mounts, seat tubes and towbars can be found in the accessories section.
NOS – New from old stock.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Total length | 470 mm |
| Width | 240 mm |
| Height | 200 mm |
| Material | Imitation leather, Foam, Steel |
| Surface | raw, varnished |
| Color | red, black |
| Spring-loaded | No |
| Hole pattern [mm] | 100 |
| Number of fixing points | 3 pcs |
Accessories & related products
HAERRY trailer coupling fifth wheel short
Manufacturer: HAERRY · Ø ball: 30 mm · Material: Aluminum · Material: Steel · Width: 75 mm · Height: 85 mm · Thickness: 6 mm · Total length: 160 mm · Surface: galvanized (blue) · Thread type: MF8x1 (fine pitch thread) · Wide intake: 75 mm · Clamping diameter: 30 mm · Hole spacing: 56 mm
EUR 77.60
Bench seat long
Manufacturer: Made in Portugal · Material: Imitation leather · Material: Steel · Ø Saddle tube holder: 22 mm · Color: black · Width: 180 mm · Spring-loaded: No · Height: 110 mm · Height: 170 mm · Lettering: No · Total length: 520 mm · Surface: galvanized (blue) · Surface: varnished · Number of fixing points: 2 pcs
EUR 83.60
HAERRY trailer coupling Attachment to seat tube long
Thickness: 6 mm · Manufacturer: HAERRY · Ø ball: 30 mm · Material: Aluminum · Material: Steel · Surface: galvanized (blue) · Thread type: MF8x1 (fine pitch thread) · Clamping diameter: 30 mm · Total length: 195 mm · Width: 75 mm · Wide intake: 75 mm · Height: 85 mm · Hole spacing: 56 mm
EUR 83.60
Explore categories from Saddle
Moped fans also bought
Nut flywheel M10x1 SW15 serrated
Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Drive: External hexagon · Width across flats: 15 mm · Ø outside: 19.8 mm · Height: 10.5 mm · Area of application: Standard
EUR 3.45
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø spars: 24 mm · Total length: 335 mm · Surface: chrome-plated · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 300 mm
EUR 59.70
mk-Merch license plate holder "mofakult" plastic (CH version)
Material: Plastic · Manufacturer: mofakult Merch · Thread type: M5x0.8 (standard thread) · Color: black · Ø mounting hole: 6 mm · Hole spacing: 50 mm · Height: 11 mm · Total length: 175 mm · Mounting type: Nuts & bolts · Width: 108 mm · Thread length: 6 mm · Number of fixing points: 2 pcs · Number of fixing points: 9 pcs
EUR 14.20
EUR 9.45
Handlebar fork plate 26 cm "Chopper" with chrome plate
Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Fork plate · Clamping diameter: 22 mm · Fork plate holder length: 85 mm · Ø outside: 22 mm · Height: 260 mm · Length handlebar ends: 205 mm · Width: 490 mm · Crossbar: Yes · Ø Strut: 55 mm · Strut length: 230 mm
EUR 47.70
GPO speedo drive 17" with lugs 12 mm axle | Puch Maxi S / N, X30 Sport NS / NL, NG-2AH, X30 Velux
Manufacturer: GPO · Ø axle: 12 mm · Material: Aluminum · Place of use: left · Place of use: right · Ø outside: 41 mm · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 12 mm · Thread type: MF10x1 (fine pitch thread) · Total height: 10 mm · Wheel size: 17 "
EUR 33.40
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
