Transparent float chamber suitable for Bing SRE, SRC, SRF and the SRA 1/11/35 carburetor. This float chamber was installed on Puch Maxi, X30, Velux, Sachs and Zündapp Belmondo mopeds, among others.
The transparent material means you always have the fuel mixture in view and can immediately see the float level and whether deposits are forming in the chamber.
The float cover can be permanently fitted. When tightening, make sure that it is only tightened lightly by hand, as with the original cap.
Ø outer: 44 mm
Total height: 31 mm
Slot width (SW): 19 mm
You can find the original float cap and various revision products for your carburettor in the accessories section.
| Material | Plastic |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | SRA (1/11/35) Velux, SRA (1/11/31) Velux, SRE, SRC, SRF |
| Ø outside | 44 mm |
| Height | 31 mm |
| Width across flats | 19 mm |
| Number of fixing points | 1 pcs |
| Puch | |
| Sachs | 503 - AAL , ABL , 2AL / 2BL , AB , AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
BING Float cap Bing Original SRE, SRC, SRF, SRA
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 43.5 mm · Height: 32.5 mm · Width across flats: 14 mm · Piaggio OEM number: A4587 · Sachs OEM no.: 0962 056 000
EUR 22.60
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Sealing, revising · Material: Sealing paper · Ø outside: 45 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.35
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Choke control: Hand choke · Carburetor type: SRE · Nominal diameter: 15 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Nozzle size: 82 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Ø Internal connection: 20 mm · Width: 50 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Standard · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 159.00
Hot 
GPO gasket set carburetor Bing SRE
Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 5.85
Not in stock
BING Carburetor cover Bing SRE (original)
Thread type: MF6x0.75 (fine pitch thread) · Manufacturer: BING · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRE · Pony OEM number: A4588 · Zündapp OEM number: 265-04.900 · Sachs OEM no.: 0962 058 005
EUR 19.00
BING Revision Set Float Bing SRE, SRC, SRF, SRA original
Manufacturer: BING · Component group Carburetor: Sealing, revising · Color: white · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Ø outside: 36.5 mm · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
EUR 35.80
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard · Number of components: 1 pcs
EUR 2.85
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Sealing, revising · Material: Sealing paper · Ø outside: 45 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.35
BING rubber grommet Ø 8 mm carburetor pipe bend
Manufacturer: BING · Material: Rubber · Color: black · Clamping diameter: 4 mm · Total length: 29 mm · Ø inside: 8 mm · Ø outside: 12 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4.65
Hot
GPO gasket set carburetor Bing SRE
Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 5.85
Not in stock
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Height: 95 mm · Choke control: Hand choke · Mounting type: Plug connection clamped · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 95.60
BING Revision Set Float Bing SRE, SRC, SRF, SRA original
Manufacturer: BING · Component group Carburetor: Sealing, revising · Color: white · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Height: 18 mm · Ø outside: 36.5 mm · Pony OEM number: A5634 · Sachs OEM no.: 0281 125 002
EUR 35.80
Working late? Evening hours on Thursday until 20:00
