Chrome-plated 28 mm cigar exhaust with 70 mm outer diameter, which can be fitted to your Puch Maxi S/N, Puch X30 Sport NS/NL and Puch X30 NG-2A moped after a small adjustment.
Flame pipe and silencer are separate and are supplied without clamp as shown.
Notes: A 70 mm clamp (item no. 11543 or 18313) must be used to fit the Puch Maxi N.
For Puch X30 NG-2A, the spanner must be bent slightly so that it does not protrude from the rear case.
The M6 screw at the end of the pot must be checked and locked with an additional nut, otherwise the nut may loosen and the silencer insert may fall out.
A quality product made in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Total length | 920 mm |
| Ø outside | 70 mm |
| Ø Internal connection | 28 mm |
| Mounting type | Welded lug, Stud bolts & nuts |
| Ø Flame tube outside | 28 mm |
| Number of fixing points | 1 pcs |
| Exhaust type | Cigar |
| Flame tube attachment | Flange |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Hot 
swiing® ingenious gasket outlet 28 mm graphite
Place of use: Exhaust · Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Thickness: 3 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Ø inside: 27.4 mm · Area of application: Tuning
EUR 8.85
Hot
swiing® ingenious exhaust clamp 28 mm heat-resistant
Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Color: Chrome · Width: 40 mm · Total length: 40 mm · Mounting type: Nuts & bolts · Ø inside: 25 - 28 mm
EUR 26.20
Explore categories from Exhaust system
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Tuning
EUR 77.60
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Nominal diameter: 44 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Area of application: Tuning
EUR 119.50
Hot
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Total length: 6 mm · Drive: Slot
EUR 19.00
Hot
GPO 44 mm cylinder head | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Ø cylinder: 44 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Area of application: Tuning
EUR 51.30
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Total length: 66 mm · Height: 95 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Area of application: Tuning · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 95.60
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Total length: 46 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Mounting type: Screws · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Ø inside: 15 mm · Total height: 53 mm · Height flange center hole: 43 mm · Hole spacing inlet: 38 mm · Area of application: Tuning · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
