This permanent marker is suitable for marking or repairing small damaged areas and should therefore not be missing in any moped, moped or motorcycle workshop.
This paint marker was designed for smooth surfaces such as glass, metal or plastic.
Color: gold
Strike width: 2 - 4 mm
Tip: round tip
Water-resistant
Abrasion-resistant
Heat-resistant up to 400°C
Note: Before use, the permanent pen should be shaken briefly with the cap on and then the tip should be carefully pumped up and down on a test paper until color fills the tip.
Further variants of waterproof pens can be found in the accessories section.
Quality product from the German manufacturer edding.
| Manufacturer | edding |
| Area of application | Paint & varnish |
| Color | gold |
| Temperature resistance (min.) | 0 - 400 °C |
| Line width | 2 - 4 |
Accessories & related products
Explore categories from Miscellaneous
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Silencer: 54.5 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Ø outside: 59 mm · Total length: 910 mm · Number of fixing points: 4 pcs · Flame tube attachment: Flange
EUR 161.40
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Height: 5.3 mm · Mounting type: Nuts & bolts · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Total length: 145 mm · Number of fixing points: 2 pcs · Thread length: 8 mm
EUR 13.00
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Ø inside: 9 mm · Ø outside: 14 mm · Total length: 122 mm
EUR 3.25
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.90
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: SHA · Width: 72 mm · Ø without reducing sleeve: 21 mm · Height: 111 mm · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Ø Output inside: 16 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 82
EUR 83.60
GPO sprocket 9 - 21 teeth wide | Puch
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: Hardened · Recording type: Interlocking · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
EUR 9.45
Working late? Evening hours on Thursday until 20:00
