Black painted EBR fork with reinforced bars suitable for various mopeds, mopeds and small motorcycles such as Hercules Prima, DKW, KTM, etc.
Be sure to check the dimensions beforehand to see if this fork fits your vehicle.
With clamp for attaching the handlebars to the fork plate.
The bolt for attaching the brake anchor plate is located on the right-hand side, 8 cm above the center of the wheel axle. The bolt has a length of 2.5 cm.
There are two M6 threaded bolts per fork leg to attach the mudguard. The distance between these bolts is adjustable and can be varied from 15 to 50 mm.
Internal diameter head tube (for stem mounting): 22 mm
Head tube length: 19.5 cm
Length from center of wheel axle to lower edge of lower fork crown: 40 cm
Total length: 64 cm
Thread: M26x1
Thread length on head tube: 6 cm
Matching headset kits can be found in the accessories section.
Branded product of the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Steel |
| Surface | varnished, chrome-plated |
| Color | black, Chrome |
| Spar end distance (center-center) | 145 mm |
| Ø outer head tube | 26.1 mm |
| Thread type | MF26x1 (fine pitch thread) |
| Ø spars | 28 mm |
| Ø head tube inside | 22.2 mm |
| Adjustable | No |
| Head tube length | 195 mm |
| Total length | 650 mm |
| Fork bridge - center wheel axle | 410 mm |
| Distance brake cam to wheel axle center-center | 80 mm |
| Thread length | 60 mm |
| Sachs |
| DKW |
| Hercules |
Accessories & related products
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Height: 13.8 mm · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Drive: External hexagon · Thread type: MF26x1 (fine pitch thread) · Width across flats SW: 30 mm · Thread depth: 12 mm · Area of application: Standard
EUR 11.80
GPO steerer tube nut M26x1 open stem chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Ø inside: 22.1 mm · Nut type: Flange nut · Height: 14 mm · Ø outside: 36.5 mm · Drive: External hexagon · Thread type: MF26x1 (fine pitch thread) · Width across flats SW: 30 mm · Thread depth: 11.5 mm
EUR 15.40
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Width across flats SW: 7 mm · Thread length: 7 mm · Area of application: Standard
EUR 3.00
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard
EUR 2.85
Handlebar fork plate 30 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Ø outside: 22 mm · Height: 270 mm · Color: Chrome · Fork plate holder length: 90 mm · Width: 680 mm · Length handlebar ends: 155 mm · Clamping diameter: 22 mm · Crossbar: Yes · Mounting type: Fork plate · Ø inside (C): 14 mm · Total length over ends: 280 mm
EUR 39.20
BOSCH Breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Ø axle: 4 mm · Cable available: Yes · Ø mounting hole: 4.5 mm · Cable length: 100 mm · Ø Internal flywheel: 90 mm · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · BOSCH OEM number: 1 217 013 025 · Pony OEM number: A4607 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BERU OEM number: 0 340 100 710
EUR 23.70
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Ø shaft: 6.1 mm · Shank length: 6.9 mm · Total length: 31 mm · Total length: 40 mm · Drive: Knurled screw · Color: silver · Thread type: MF6x0.75 (fine pitch thread) · Ø External head: 9.15 mm · Thread length: 15 mm
EUR 4.05
Union pedals plastic standard
Manufacturer: Union · Material: Plastic · Material: Steel · Surface: rubberized · Height: 29 mm · Total length: 129 mm · Drive: Hexagon socket · Drive: Outer edge · Color: black · Thread type: FG14.3 (9/16" 20G) · Width across flats SW: 15 mm · Width: 77 mm · Reflectors: Yes
EUR 15.40
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (known as Nirosta®) · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø mirror surface: 107 mm · Thread type: M8x1.25 (standard thread) · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Total length: 360 mm · Thread size: M8 · Clamping diameter: 22 mm
EUR 29.70
swiing® revival solid exhaust clamp 28 - 30 mm galvanized (strength 12.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 28 - 30 mm · Ø outside: 41 mm · Total length: 46 mm · Color: silver · Width: 42.5 mm · Material thickness: 1.6 mm · Mounting type: Nuts & bolts · Pony OEM number: A1897 · Sachs OEM no.: 0251 113 105
EUR 9.40
Cut cable set Black | Sachs Automatic
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1600 mm · Total length: 1650 mm · Total length: 1850 mm · Total length: 2200 mm · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm
EUR 26.10
Collection only possible with online purchase and appointment.
