Coupling piece compatible with all pedal-assist bikes, including the Sachs 50/2, Sachs 503, Puch X30 Sport NS / NL, Puch X30 Velux, and Zündapp Belmondo mopeds.
Manufactured in Switzerland, this coaster brake bushing is an exact 1:1 replica of the original, fits perfectly, and is of the highest quality.
You can find additional backpedal brake parts—such as a drive sprocket, a drive cone, and a complete set—in the accessories section.
A high-quality product made in Switzerland.
Original Puch part number: 320.4.41.022.2
Original Sachs part number: 0872 117 000
| Manufacturer | Made in Switzerland |
| Material | Steel |
| Surface | Hardened |
| Ø inside | 10.6 mm |
| Number of teeth | 28 pcs |
| Ø outside | 27.5 mm |
| Puch OEM number | 320.4.41.022.2 |
| Sachs OEM no. | 0872 117 000 |
| Puch |
| Sachs |
| Zündapp Belmondo |
| Cilo |
Accessories & related products
swiing® revival Ball Holder 25/37/6.3 Kickbike
Bearing type: Ball ring · Stock number: K042 · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø inside: 25 mm · Ø outside: 36 mm · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Area of application: Standard · Material: Steel · Width: 6.8 mm · Ball bearing closed: No
EUR 9.45
swiing® revival Ball Holder 25.5/6.3 Coaster Brake Driver
Bearing type: Ball ring · Manufacturer: swiing® revival parts · Ø outside: 25.5 mm · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Ball bearing closed: No · Puch OEM number: 900.6909 · Sachs OEM no.: F 4762
EUR 8.25
Not in stock
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread length: 34 mm · Thread length: 45 mm · Total length: 175 mm · Shank length: 95.6 mm · Ø shaft: 10.5 mm · Thread type: MF10.5x1 (fine pitch thread)
EUR 35.80
swiing® revival brake anchor plate HR 905 rear coaster hub | Puch Maxi S, X30 NS / NL
Manufacturer: swiing® revival parts · Ø outside: 91.9 mm · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 90 mm · Ø axle: 10.6 mm · Ø bore: 10 mm · Total length: 193 mm · Ø shaft: 10 mm · Cranking (offset): 13 mm · Puch OEM number: 349.541.507.0
EUR 155.40
Explore categories from Back pedal parts
Moped fans also bought
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Ø inside: 9 mm · Ø outside: 14 mm · Manufacturer: swiing® revival parts · Length spring hook: 19 mm · Length spring hook: 53 mm · Material: Spring steel · Surface: galvanized (blue) · Total length: 122 mm
EUR 3.25
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Ø outside: 10 mm · Number of components: 3 pcs · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Thread length: 30 mm · Width across flats: 8 mm · Total length: 41.1 - 65 mm · Thread type: M6x1 (standard thread)
EUR 19.70
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread length: 34 mm · Thread length: 45 mm · Total length: 175 mm · Shank length: 95.6 mm · Ø shaft: 10.5 mm · Thread type: MF10.5x1 (fine pitch thread)
EUR 35.80
swiing® revival wheel nut M10.5x1 x 10 SW19 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut · Width across flats: 19 mm · Height: 10 mm · Nominal diameter (thread): 10.5 mm · Thread type: MF10.5x1 (fine pitch thread) · Drive: External hexagon
EUR 8.25
Buzzetti main stand extended black (1A quality) | Puch Maxi S, P1 | X30 NS, NL, NG
Manufacturer: Buzzetti · Material: Steel · Color: black · Surface: powder-coated · Stand base - center mount (A): 225 mm · Total width of stand base (B): 235 mm · Wide receptacle (C): 63 mm · Ø Receptacle (D): 18.5 mm · Spring nipple distance - center pivot axis (E): 100 mm · Wide upright foot (F): 30 mm · Wide upright foot (F): 50 mm · Total height: 240 mm · Puch OEM number: 321.2.24.001.2
EUR 76.00
swiing® revival 4 mm intake gasket 12 mm intake manifold | Puch E50, Z50, ZA50
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Ø inside: 12 mm · Material: Oiled paper · Material: Phenolic resin (colloquially known as Bakelite) · Ø screw holder: 6.2 mm · Hole spacing inlet: 38 mm · Thickness: 4 mm
EUR 9.00
Working late? Evening hours on Thursday until 20:00
