19 mm tuning intake manifold for Puch X30 Sport mopeds / mopeds with Z50 engine and Puch Maxi models which have an E50 engine installed.
The CNC-milled intake manifold is designed for Dell'Orto PHBG carburettors and has a round opening on the cylinder side.
On the Puch X30 it is still possible to fit the original side skirts, but it is not possible to operate the hand choke or fit an air filter. Cable chokes and replicas of the carburetor with service hatch at the bottom cannot be fitted.
| Manufacturer | AKOA |
| Camouflaged | No |
| Material | Aluminum |
| Ø External connection | 24 mm |
| Ø inside | 19 mm |
| Hole spacing inlet | 38 mm |
| Total height | 68 mm |
| Height flange center hole | 57 mm |
| Mounting type | Nuts |
| Area of application | Tuning |
| Number of fixing points | 2 pcs |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Total length: 82 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Width: 70 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Height: 124 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45 · Mounting type: Plug connection clamped
EUR 142.90
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110
EUR 24.90
swiing intake manifold 16 mm | Puch X30 NS, NL, Sprinter
Material: Aluminum · Manufacturer: swiing · Mounting type: Screws · Number of fixing points: 2 pcs · Ø inside: 16 mm · Area of application: Tuning · Ø External connection: 20 mm · Total length: 48 mm · Hole spacing inlet: 38 mm · Total height: 70 mm
EUR 59.50
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 19.5 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: PHBG AS · Choke control: Hand choke · Total length: 71.5 mm · Color: black · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Width: 71 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Height: 123 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Camouflaged: No · Nozzle size: 85 · Size of secondary nozzle: 50
EUR 95.20
swiing intake manifold 15 mm CNC | Puch X30 NS, NL / Sprinter
Material: Aluminum · Manufacturer: swiing · Mounting type: Screws · Number of fixing points: 2 pcs · Ø inside: 15 mm · Area of application: Tuning · Ø External connection: 20 mm · Total length: 48 mm · Hole spacing inlet: 38 mm · Total height: 70 mm
EUR 83.30
AKOA intake manifold 19 mm PHBG angular | Puch X30 NS, NL Z50, E50
Material: Aluminum · Manufacturer: AKOA · Mounting type: Nuts · Number of fixing points: 2 pcs · Camouflaged: No · Ø inside: 19 mm · Area of application: Tuning · Ø External connection: 24 mm · Height flange center hole: 57 mm · Hole spacing inlet: 38 mm · Total height: 68 mm
EUR 83.30
Not in stock
Moped fans also bought
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Total length: 82 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Width: 70 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Height: 124 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45 · Mounting type: Plug connection clamped
EUR 142.90
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Number of components: 1 pcs
EUR 3.35
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Nipple length: 10 mm · Number of components: 1 pcs
EUR 2.85
Collection only possible with online purchase and appointment.
