Special, hand-made H100A+ racing exhaust system for your Puch moped / moped with E50 engine and exhaust outlet.
This racing exhaust is ideal for cross or racing use and, compared to the ADDY H100A, generates a strong power band, especially in the low to medium speed range, thanks to the extended midrange. The ideal exhaust timing for these racing engines is around 160 to 185 rpm.
Notes: We recommend using nuts with a key width of 8 or 9 mm for fastening to the outlet.
When used on a standard Puch Maxi frame, we recommend replacing the original fuel tap with an intermediate piece in conjunction with a 90° outgoing fuel tap.
Other complete racing systems as well as engine cases, cylinder kits and the aforementioned fuel outlet parts can be found in the accessories section.
Quality product from the ADDY by Schöb Engineering brand.
| Surface | varnished |
| Manufacturer | ADDY |
| Mounting type | Nuts & bolts, Stud bolts & nuts |
| Number of fixing points | 3 pcs |
| Material | Steel |
| Ø Silencer | 55 mm |
| Total length | 870 mm |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
| Color | black |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival special nut M6 SW8 (sprocket ref. back pedal / intake manifold)
Manufacturer: swiing® revival parts · Material: Steel · Nut type: Hexagon nut · Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Drive: External hexagon · Width across flats: 8 mm · Height: 6 mm
EUR 3.45
Gilardoni italkit cylinder head 47 mm (75 ccm)
Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Ø cylinder: 47 mm · Number of fixing points: 4 pcs · Ø screw holder: 6.5 mm · Hole pattern [mm]: 44 x 44 · Candle thread: long · Total length: 155 mm · Width: 155 mm · Height: 58 mm · Area of application: Tuning
EUR 82.40
Hot 
MLM exhaust "Crazy Pipe" black straight outlet | Puch
Manufacturer: MLM · Material: Steel · Surface: varnished · Ø outside: 91 mm · Total length: 945 mm · Color: black · Ø Silencer: 45 mm · Ø Internal connection: 22 mm · Exhaust type: Cone / double cone · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs · Flame tube attachment: Stud bolts & nuts
EUR 412.60
Not in stock
ADDY exhaust H100A | Puch
Manufacturer: ADDY · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 55 mm · Total length: 820 mm · Exhaust type: Cone / double cone · Mounting type: Nuts & bolts · Mounting type: Stud bolts & nuts · Number of fixing points: 3 pcs · Flame tube attachment: Flange
EUR 299.00
Explore categories from Exhaust system
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 8 mm · Area of application: Standard · Thread length: 7 mm · Ø Bundle: 6 mm · Width across flats: 7 mm · Total length: 15 mm
EUR 3.00
Dell'Orto 21 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Nominal diameter: 21 mm · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: PHBG AS · Total length: 82 mm · Material: Aluminum · Color: black · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Width: 72 mm · Ø Internal connection: 24 mm · Height: 125 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Nozzle size: 92 · Size of secondary nozzle: 50 · Area of application: Tuning
EUR 143.50
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 65 mm
EUR 15.00
swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Total length: 8 mm · Drive: Slot
EUR 25.00
Not in stock
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.90
Fortune / Merrick 2.50 - 2.75 x 17" inner tube
Manufacturer: Fortune · Tire width: 2.5 - 2.75 " · Tire width: 2.75 " · Tire width [mm]: 63.5 - 69.85 · Width: 2 1/2 " · Width: 2 3/4 " · Tire height [%]: 100 · Wheel size: 17 " · Valve type: TR4 Auto valve · Old designation: 21 x 2.5 " · Old designation: 21 x 2.75 "
EUR 14.20
Cable set E50 engine automatic black | Puch Maxi S / N
Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Outer shell length: 6000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 23.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
